Tuerca

It is a beautiful Anodized color

Fits:YAMAHA XT250X 06-17, YAMAHA WR155R 20, YAMAHA TTR50 07-17, YAMAHA TTR125 02-17, YAMAHA TTR110 08-17

Japan User(translated)

Excellent

Dec 13, 2015

I made it a brilliant color of One point. OEM's Stem Nut is 30 Gram, this Zeta's Stem Nut is 10 Gram, the feeling I have is also different by Large. I also made Stem Cap a dish of the same color. Just OEM's Rubber cover was almost 0 Gram, this Jeta's Stem Cap was 5 Gram, so Total made it 15 Gram lighter.
The appearance is also noticeable, and because the color is vivid, the Tension goes up. Since the Double-end Wrench does not enter unless you remove the Handlebar itself, it is good to leave the original mark on the Handlebar and remove it. OEM was also quite strongly tightened, so this Zeta Stem Nut was also tightened securely with Double-end Wrench, but the corner was slightly damaged because it was not curing with cloth etc. - - -.
I was disappointed with just one beautiful article - - -. If there is something to be done next time, I will put on cloth and apply force.
Also, when tightening this Zema Stem Nut, it is good to temporarily hold Handlebar and then apply force. Handlebar also got lighter, and I feel that it will be light..

Helpful?

Fits:YAMAHA XJR1300 98-15, YAMAHA TRACER900 15-21, YAMAHA TENERE700 20-21, SUZUKI GSX-S750 17-21, SUZUKI GSR250 12-17

Japanese Webike user

Excellent

Jul 18, 2021

Beautiful

The cutting is beautiful, and the texture is a nice change from the cheesy Plating!
I used it on my gsr750.

Helpful?

Fits:HONDA CT125 HUNTER CUB 20-21, HONDA XR400 Motard 05-08, HONDA XR250MOTARD 03-07, HONDA XR250 BAJA 95-07, HONDA XR230MOTARD 05-10

Japanese Webike user

Excellent

May 18, 2021

Cap is also needed

Since it is necessary to remove the Handlebar, it is recommended to install it at the beginning of the work because it is strange to work Large when various things are attached to the Handlebar.
I had a Grip heater on mine and it was a bit of a hassle.
In addition, the Cap which attaches to the Stem hole is also Quantity because there is a feeling that it is a little short only with Nut.:I think you should buy Set.

Helpful?

For the use of Stem MountAttachment and also for Dress-up.

Fits:HONDA CT125 HUNTER CUB 20-21, HONDA XR400 Motard 05-08, HONDA XR250MOTARD 03-07, HONDA XR250 BAJA 95-07, HONDA XR230MOTARD 05-10

Japanese Webike user

Excellent

Mar 28, 2021

[How is it used?
I use it on my JC75 Honda GROM. I wanted to use Stem Mount's Quadlock Smartphone Holder, but GROM is OEM with Cap Nut, so Stem hole is blocked. I wanted to use Stem Mount QuadlockSmartphone Holder, but GROM is OEM Cap Nut and Stem hole is blocked.
The color of Anodized is also good, so I think it is visually Accent and has Dress-up effect.

Was the one you received as per Image?
I had imagined that it was lightweight because it was Aluminum Nut, but it was the impression that it was even lighter than I thought.

Was the installation difficult?
It is not difficult to install though it is necessary to prepare the SocketNut of LargeSize which has few chances to appear. I thought that it was necessary to be careful because the Anodized of the part which came in contact with Wrench might be damaged if I did not tighten it by biting a thin cloth etc.

[Opinions and requests to Manufacturer
When I'm not using the Smartphone Holder, I'm worried about the inside of the Stem being visible while penetrating, so I put a suitable grommet in it to hide it, but it's not good. Can't some manufacturer provide me with a stylish cap...?

For the use of Stem MountAttachment and also for D...

Helpful?

Fits:SUZUKI DJEBEL250 XC 95-06, KAWASAKI KX250 04-08, KAWASAKI KX450F 06-16, KAWASAKI KX250F 04-16, KAWASAKI KLX450R 08-09

chaminda

Excellent

Jan 5, 2021

zeta stem nut

may i installed it zeta stem nut on my 2016 drz400sm. the nut are nice color and perfectly fitted. this item all so very light weight and good finishing. im used zeta stem cap all so. cap are well fitting. may i recommend ..