KITACO is a brand that releases a wide variety of items mainly of 4MINI parts. They release many products essential for exhaust gasket and others of almost all vehicles.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
The hoeses on the immobile car were deteriorating, so I replaced them here.I can see the fuel flowing properly and the mounting port is solid with no fuel leaks.It has been outdoors and in a rainy env...
I installed it on a normal cab.It's all-weather, so you don't have to worry about rainy days! That doesn't mean it's not a good idea, but it's a lot safer than bare bones.It was easy to install, and i...
I bought it for the Exhaust System replacement timings, it is a two-pack, so it can be used for removing the Exhaust System when replacing another part of the car.I'm just worried about losing it beca...
I put the Gasket of CYGNUS on the Max star125 (Thunder 125) because the size of the Large body would be the same.Single-cylinder, so Quantity:1 Set of 2pcs. would be a great deal!You can keep it in re...
Crank change to 110cc.Further reinforcing the Spring of KITACO Three-Piece Reinforced Clutch.Even a 110cc car will not slip.Durability remains to be seen, though.
I replaced all the wear and tear while opening up the lower back in OH.It's a lot safer than being stingy and regretting it later.It's not the kind of Parts to compare performance, but it's self-satis...
I replaced it with the Camshaft Chain as well as the OH.It will be a safe ride for the foreseeable future!I will check for Oil blotting for a while.
It started spitting White smoke and I decided to OH it.It's a pain in the ass when oil leaks and seepage occurs afterwards, so I change it every time I open the Engine.
I installed it on my MONKEY125.It can be installed with no problem if you can do simple maintenance on the Level.We replaced it when we replaced the Grip.After installation, the wrists are easy on the...
I bought this product for CUBs, but I installed it on a different model of car as I bought it to use it anyway.It's a YAMAHA X1R model.Of course, the Harness that comes with it doesn't come with it, s...
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | | |
 |  |  |
| | | |
It is used for both Oil and Coolantfor Replacement.I appreciate the part of the lid that prevents foreign objects from getting into the storage area. I think it's easy to use.
I installed it on a FUSION model 2 before it was resold.There is no hazard function in the OEM.There is a position, and it is a model year with headlights on and off.The Switch that came with it wasn'...
At first, I used a slotted screwdriver to deal with the problem, but I still feel safer with a dedicated tool.Considering the strange GEAR chipping and other Troubles, this is a product I wish I had p...
I use it to replace the plug of ZrX1200R. As others say, there is a plug deep in the Engine. It seems that a dedicated one is attached to the on-board tool. (It was a used car, no tools.) I've never u...
I had a hard time picking up the Bolt because it fell down unexpectedly when I had to move it around the carburetor.I bought it as a bonus. Since then, for better or worse, I haven't had a chance to u...
It's a standard thickness lock wire and very easy to use. The best part is that it comes in this Case. I've had it for more than 20 years and it hasn't gone away. I think it's going to last a lifetime...
It's a good product, but when I was using it, I had a situation where the magnet on the tip came off. I wanted to pick up the parts, but it was a tragedy that only the magnet was left behind. I strong...
The Oil Jug that I used to use, I think it was purchased at Home Center's Car Parts Corner I bought it because I ran out of Bellows in the Nozzle section. In OthersMaintenance, it is very useful. When...
Wiring is required for the cars competing in the race:KITACO's Stainless Steel Lock Wire is available in several different thicknesses, so you can choose the one that best suits your needs.This thickn...
I've used several Oil Jugs and I think this one is the nicest to use and store. It's also good that it has a little bit of a brown strainer inside.If it's a cheap one, Oil leaks from the slot of Nozzl...
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
I used this as a reference to build the Bore Up Kit for APE. The kit that I purchased was Takekawa, but it was described in detail than the attached Manual, and it was very helpful.
Overnight touring gives you a greater sense of security to use in your accommodation.It's quite pricey, but it's the price for peace of mind.However, the drawback is that it is heavy. I think this is ...
Detailed Illustration and easy to understand.Easier to understand than the service manual.The differences between the spec. of the engine are also described.It is generally easy to use. It's not a bad...
I bought a new motorcycle and I'm having trouble getting power to the Navigation It was a good timeThe power supply was branched from Horn's power supply and installed successfully I hope it lasts as ...
We will learn how to disassemble and assemble the OEM parts as well as the 5-Gear's How to assemble the TuningParts, including assembly and installation of the Special Clutch The contents are diverse,...
You will learn how to disassemble and assemble the OEM Head as well as the Bore Up Kit Assembly, etc. of TuningParts, adjustment of ignition timing, carburetor The contents of the book cover a wide ra...
I bought it as a YZF-R25 Saiya Full Cowl RepairThe size is slightly different, a little short below the neck, but I managed to stop itAs far as Repair goes, it's helpful...but I can't deny that it's p...
I bought it for my new MotorcycleI was afraid of theft, so I took the plunge and went with this oneI've never seen such an expensive rock beforeIt would have been nice if there was a cover or somethin...
I have a W800, and even though I don't usually touch it myself much, it's easy and quick I was able to install itI have installed it directly to the Handlebar by passing Wiring underneath the Tank and...
I bought this to review Security as I was changing my MotorcycleWhen you receive the package, you are overwhelmed by its weight, and the sense of security you get when you open the box and look at the...
 |  | |
| | |
It is easy to install and fits perfectly because it is only for ADV150This motorcycle has a small Helmet in, so it's hard to store the Helmet since things tend to happenThe Helmet holder is very usefu...
The helmet holder is in the Rear Sets, but to be honest, it is difficult to use, so I bought it It wasIt takes a little bit of effort to support it because it is sandwiched between the Frame and Tande...
In the GSX250R and NINJA, you can remove the Tandem seat and use the Seat lock It's a way of securing a helmetIn Touring and so on, you can't use it if you put a Back on it, it's going to be a Large w...
Matching CB250R for printing (MC52) is the CBR205RR in the photo (MC51) You will see and feel uneasyI don't know how it feels to install it as I haven't installed it yet, but it will be installed as p...
The Helmet holder on the back of the OEM Seat is completely uselessI'd love to see this one adopted as an OEMIt opens from the top when you unlock itNot applicable, but I have it on my MT-03
I'm using it on my MONKEY125 (OEM is too deep because it's assumed to use auxiliary wire)Clutch lever attached to the side, because the Handlebar Lock cuts to Left It's a hindrance, but it's also a ha...
This product uses two bolts which are holding the tandem seat footrest. These bolts are really stubborn so you might need some equipment for that. And if you once loosen them you better use some Threa...
The position of the Mirror Holder changes when replacing the Master Cylinder I bought it because I've been using the same type of Helmet holder for a while now I used to use a helmet holder of the sam...
It is better not to interfere with footpeg because the position where Helmet is applied is behind.It does not get in the way even when used in conjunction with Tandem Footpeg.The place where Bracket c...
There are options of KITACO, KIJIMA, Babyface and 3 Manufacturer place, but I think that there is no difference in function. So, what will you choose as a standard? Although this 3Manufacturer install...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
? 
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online shopping experience with us. If you have ANY questions about the operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you have not received it within the hour, please contact us.
About our "Mybike" service 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING