Lámpara de reflector múltiple

I was able to dress-up like the most New Model

Japanese Webike user

Excellent

May 31, 2020

I used it on my W800
The latest model of the Rear Disc car has a standard LED HeadlightSpec is
The 2016model we own is normally Halogen
Lens cut is not a Multi-reflector either, as it is an older model
At first, I only replaced the H4LED bulbs, but the lens cut is different or
It's diffuse and not as bright as expected, so I decided to make it Multi-reflector
At first, I was thinking of OEMParts diversion of the newest model, but
When I picked up the OEM Parts of the necessary parts, it became Large strange and expensive..
So, in order to make it a multi-reflector, I used Rim with
I purchased this product
It comes with the Parts that are set from the beginning of the installation position of Honda and for KAWASAKI The installation ended up being very Smooth
On the Yamaha and SEA BASS models, the position of the Screw on the Rim seems to be different

This Lens is fitted with LED type H4 bulbs to the body of the car:When set, the
There was less diffuse light than the standard Lens, but there was still some light turbulence
I did a net search, and it seems to be compatible with LED bulbs
From here on out, there seems to be no choice but to use the LED bulb side
Nevertheless, the Lens exchange reduces the diffused light so much and makes it look brighter
Ray Brick's Multi-reflector Lens is very good
The best part is that there are almost no lens cuts on the glass surface
I love the W800 that I installed because it looks like the newest model of W800

I was able to dress-up like the most New Model

Helpful?

It is quite bright when used with an LED Bulb

Excellent

Jul 9, 2019

The OEM was dark and scary, so I changed it, and Valve is also RISING for Sphere Light I changed it to 2 Although it is good because the irradiation range became wide, and the brightness increased considerably, it is good, but the Right The Side Cutline is not very clear Side is good with the Cutline up, but on the Right Side GizaGizaLine comes out I wanted it to have a smooth R here
If you use it together with LED, the glare will go up to the extent that the brightness increased to Large width If you put one person on the back of the camera with the light distribution adjusted to just the right level without glare, the range of illumination will instantly increase It will be a nuisance to oncoming traffic, and you should keep it a little lower when you're alone and in anticipation of that It seems

It is quite bright when used with an LED Bulb

Helpful?

If you can use it for Yamaha as it is

Very Good

Dec 29, 2016

It seems that it can not be attached as it is with XJR 400 or R1 - ZOEMLight
Change to the headlight case of the adaptive model such as ZEPHYR
With Other Company ProductMulti-reflector, bend the inner Rim claw
I saw that Net can be installed if it is a Type fixing Lens
I bought it because I used cheap other company Product Multi-reflector
As a feeling of use, it is exhausted as one word of fluff stones
What was originally attached is brightness - How light spreads - It does not compare with ease of running etc
I should have bought it sooner

Helpful?

Excellent

Dec 25, 2012

It is attachment after a car also at a Motorcycle.If
quantity-of-light Up is top priority, it will be HID, but (it is these days LED?) it will be a Multi-reflector if a Cost is considered.If the
Valve is changed, the further quantity-of-light Up is also easy.
Is light distribution good the quantity of light not only going up but?It is felt brighter than a NORMAL.Since there are not necessarily many runs in the
night, it is made required and this is enough.Only by replacing a Lens without a Cut from the
NORMAL, the Image of a countenance changes very well.After
> (feeling so is .. although it will surely be only an Owner) is replacing a Plastic lens from a Glass lens. Has it also become a weight saving partly?
It can exchange easily and attachment is also possible firmly.

Helpful?

Excellent

Apr 9, 2012

"It was attached to HONDA CB400SF (NC31 1992 model). If you work as an attached instruction, it can be attached easily. Compared with the genuineheadlight of a lens cut, it became to illuminate a large area more brightly. In the genuine, the appearance looked old but it became a sharp, and the impression when seen from the front became a modern style. Since an efficient halogen bulb is also attached, I think that it is worth to buy."