Bolsas laterales suaves

I saw the Side BackBracket for YZF-R7 on the market and bought it together with the bag to increase the load capacity since it looked like it could be installed on the R6 in terms of design.
https://www.webike.net/sd/24981150/
The problem of loading for practice sessions etc. was solved because it was successfully installed.

CONCLUSIONS:
- Spacer can be installed. Bracket can be attached by removing the Spacer.
- Slightly hits the blinker, so adjustment is necessary when the bag is attached.
- Helmet holders can coexist depending on the item.


The design of the Cowl is slightly different, or it is necessary to put a Spacer between the Body and Bracket.
This time K-CON Aluminum spacer collar (φ8.2/20×5) To Quantity:Pair (for Left and Right) In Quantity:1 Set of 4pcs. used.
https://www.webike.net/sd/1343095 /

AGRAS Helmet holder( https://www.webike.net/sd/23562969/), but coexistence can be achieved in a manner of speaking if an additional Spacer is bitten.
Additional. (φ8.2/20×10) If you add the two collars of "Limit", the Bag and Blinker, Helmet holder and BagBracket will interfere a little, but Limit can be installed.
Adjust to your liking, but note that adding color will shift the bag position downward and interfere more tightly with the blinker.

I had it installed on my MT-07. The quality and capacity are perfect. It can be installed SMARTly because it is an Exclusive Design of the car model. The price is higher than other manufacturers, but you can feel the peace of mind that only an OEM product can provide.

I switched from versys650 to MT09sp and the challenge was how to carry my luggage to Circuit to ride by myself.
So, I bought a Side bag from OEMOption.
The actual use is this weekend, but already This one is Large and strong. I feel confident and secure that this is the case.
Working process
Side bag:Finished product. No work required.
Bracket part:Assembly required. Easy to assemble.
?Material:Fix the Male part of the Bracket to the end of the Stainless Steel rod.
Fix the female part of the bracket to the tandem footpeg part with a bolt.
At this time, the bolt on the Left Side Tandem Footpeg uses a screw to prevent tampering, so a special tool is required.
There is also a helmet holder on the Left Side, but it cannot be attached at the same time; the helmet holder must be removed.
I am not in the habit of using a Helmet holder, so no problem.
[Instructions for use and features
? The Material is placed on the Female part of the Bracket that is bolted on to the Tandem Footpeg on the body side.:Stainless Steel BracketMale part. "Snap" Insert and fix until you hear the sound of
Side bag has a cloth pocket into which the Bracket is inserted. (Prevention of wrapping around the Tire, prevention of swaying)
Insert the buckle of the side bag into the buckle of the Tandem Footpeg section and fix it.
Fix the side bags to each other with the Magic tape at the top.
In other words.
? Quantity of Bag in Bracket of:Pair (for Left and Right) Position the
? Buckle of ? prevents Bag from Gapping backwards.
? Magic tape to support the weight of the entire load.
Universal's Side bag bag? and? The only thing that is missing is a side bag. The Bracket is the most large feature of this product. The large side bag is also available in a wide range of sizes. The time required for installation can be shortened to a Large size thanks to the bracket of ?
When not normally worn, the female part of the bracket (compact) is just above the tandem footpeg, so it is unobtrusive and reflecting. It is a design that does not destroy the overall forme.
Material when stored:You can keep the Stainless Steel Bracket in the Side Bag to avoid the risk of losing it.
Circuit's own products and references
My Circuit bring the following items.
Wallet/Cell Phone
Leather suit
Spine Protector
Chest guard
RACING Gloves
Inner Gloves
Racing boots
Full face helmet
Mirror shield
Helmet remover
Rear Red flashing lights (anti-fog)
Gum Tape
Portable tools from Nipperetc.
Air toolHose
Air gauge
CircuitPastDataFile
Ballpen
Mask
T-Shirt, Shorts, Sandals
Sunglasses and eye drops
hat
Towel, Rags
chair
Luggage Storage Seat
Rain jacket and garbage bag (for waterproofing during transportation)
Luggage Net
Charger
clock to be placed on tables, bookshelves, etc. (as opposed to a watch)
Hanger (which I failed to capture in the photo)
Of the above, heavy items and items that will not be removed until arrival are packed in the DEGNER Waterproof Bag, and light items such as rain jacket, wallet, cell phone, hat, etc., are thrown into the Side Bag.
I actually put it in and there is still plenty of room.
You may think that you should wear Gloves and Chest guard, but I pack them from the beginning because what I wear depends on the weather at the time of departure and there is a possibility that I may forget them.