・ USB tipo C
Los conectores en forma de L evitan que el cable se salga y se rompa.
No se requiere fuente de alimentación separada.
Cargue su teléfono con este Cable1 pc
Eliminación de energía simplemente insertando el interruptor de freno.
Compatible con carga rápida.
[Jefe de arnés]
Cuerpo
Tipo-CConector → transformador: Aproximadamente 800 mm
Transformador a línea Plus: Aprox.. 180mm (con FuseCase)
Transformador a línea negativa: aproximadamente 800 mm
Arnés de extensión
Línea Plus: Aprox.. 1,200mm
Línea negativa: aproximadamente 800 mm
Interruptor de freno: aproximadamente 270 mm
Arnés de ramificación: Aprox.. 50 mm después de la división
[entrada]
Voltaje de entrada: DC12V
DC12V: DC12V-16V
Corriente de entrada máxima (sin carga) : 5 mA o menos
[Puerto de salida]
Voltaje de salida: 18 W (5V / 3A, 9V / 2A, 12V / 1.5A)
[Contenido del producto]
・ UnitBody (Fusible MINIGlassTube 5.2X20 / 250V5A) x1
・ Manillar ClampX1
Arnés de bifurcación del interruptor de freno (Línea Plus) x1
Arnés de extensión (Línea Plus) x1
Arnés de extensión (Menos rayos) x1
Conector de cableado X1
・ Tipo de lanzamientoTie BandX1
· Tie BandX2
* Si el terminal de tipo plano (Tipo 187) no se usa para el interruptor de freno, luego use el arnés de extensión adjunto (CA103) para conectarlo.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
・USB Type-C
・The L-shaped connector prevents the cable from sticking and disconnecting
・No need for a separate power supply
・You can charge your phone with just this cable
・By simply interrupting the brake switch, you can extract power.
・Supports fast charging
[Harness length]
■Body
・Type-C connector to transformer: Approx. 800mm
・Transformer to positive wire: Approx. 180mm (including fuse case)
・Transformer to negative wire: Approx. 800mm
■Extension Harness
・Positive wire: Approx. 1,200mm
・Negative wire: Approx. 800mm
■Brake switch: Approx. 270mm
・Branch harness: Approx. 50mm after branching
[typing]
・Input Voltage: DC12V
・Input voltage range: DC12V-16V
・Maximum input current (no load): 5mA or less
[Output]
・Output rated efficiency: 18W (5V/3A, 9V/2A, 12V/1.5A)
[Set components]
・Main unit (mini glass tube fuse Φ5.2 x 20 / 250V 5A) x 1
・Handlebar Clamp x 1
・Brake switch branch harness (positive wire) x 1
・Extension harness (positive wire) x 1
・Extension harness (negative wire) x 1
・Wiring connector x 1
・Release type cable-tie x 1
・Binding bands x 2
*When the brake switch does not have a flat terminal (Model 187), connect it with the supplied extension harness (Model CA103).
*This product is compatible with USB Power Delivery and may not be used with devices that do not support high power fast charging.
*Not available for Daytona headset DT-01, DT-E1, other companies' headsets and some heated cigarettes.Also, some cameras (including single-lens reflex / mirrorless cameras) may not be usable.
*There may be changes in product specifications due to the manufacturer's reasons.