I am using this on my moped bike - Honda RS150R v2 (known as Winner in Vietnam for your reference). I want to install a dashcam and a USB-C charger on board and i want a reliable power source without tapping directly into the battery. The daytona WR 3 is very good, each line is fused at 5A, and a pair of 7.5A. It is waterproof as well but i installed it behind my headlight so there's minimum risk of water exposure.
View Detail
DAYTONA
Unidad de alimentación accesoria D-UNIT WR (D-Unit Water Resista
Product # 16037
4.4 (16 opiniones)- Instock
12.98 EUR (2,241 JPY) 15.05 EUR Save 14%
Webike Point: +22 pt
(0.12 EUR)
información de entrega
In Stock, Ships within 24 hours.
Estimated arrival date around
Descripción del producto a continuación se traduce automáticamente por Google.
Product detail
[Talla (longitud del arnés)]
Arneses de entrada / aprox. 1300mm
Arnés de salida/aproximadamente 250mm
[Especificaciones]
Diseño impermeable
La energía se enciende y se apaga enlazando la llave principal
Hasta tres accesorios pueden ser colocados individualmente
Terminales tipo Gibone (CA/CB103), 3 puertos
Corriente de disparo : 7.5AX2 (Corriente recomendada) : 4A*),5AX1 (Corriente recomendada : 2A*)* para su uso con termistores PTC
Diseño de alto rendimiento de 20A
[Composición del producto]
Unidad principal X1
Cinta de doble cara x1
Conector X1
Banda de unión X2
Banda de unión (tipo de liberación) X2
**Mantén la parte de la conexión terminal lejos del agua.
*El termistor PTC controla la corriente que fluye a través de él por el valor de calor y resistencia. Si la corriente excede la corriente especificada, el valor de la resistencia se hace alto (alta temperatura) y el termistor PTC se apaga. Si se dejan los aparatos electrónicos conectados en esta condición, la temperatura no baja y el aparato puede fundirse. Si el dispositivo deja de funcionar, desconéctelo lo antes posible.
*No recomendamos que lo instale bajo la sábana porque la unidad genera calor.
*Para la conexión a los aparatos eléctricos, realice el proceso de cableado por separado.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo..
Gestión centralizada de la energía.
Extraer fácilmente múltiples fuentes de alimentación de 12V.
Fuente de alimentación de accesorios compacta y a prueba de lluvia.
Unidad de alimentación compacta con tres fuentes de alimentación accesorias (ACC).
La energía puede ser encendida y apagada conectándola a la llave principal y puede ser instalada en cualquier lugar con un diseño impermeable..
Se pueden conectar hasta 3 accesorios individualmente....
Diseño fiable de alta potencia.
Tomando la energía principal directamente de la batería, es posible obtener una alta producción mientras se reduce la carga del equipo eléctrico de fábrica..
No importa dónde esté instalado..
El diseño impermeable permite instalarlo en un lugar lluvioso..
Precaución
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Opiniones de los usuarios
Reviews with image
Installed on: SUZUKI BURGMAN 400
Jun 9, 2023
It is quite small than i expected and that makes easier to find the location for install power supply.I connected heated grip there and work quite well.Highly recommend product.
View Detail
Helpful?
May 4, 2022
I purchased this for charging my phone and for navigation power. I chose this one because the power supply around the handlebar is messy, and I installed it under the Seat, even though the body is supposed to be waterproof. It works fine. I recommend it because it is inexpensive.
View DetailHelpful?
Mar 28, 2022
For future electrical equipment.
I installed it while servicing my ZOOMER. I had previously installed D-UNIT, a different version of this product, on my ZX-10R, but was attracted by the waterproof specification and compactness of this product, so I installed it on my ZOOMER as well.
I installed it in the position shown in the picture, and the ACC power is supplied from BlinkerWiring. The work itself is not difficult, but if you do not have basic knowledge of electrical systems, it would be safer to ask a shop to do it for you. After installation, check the power with an energizing tester. We are planning to install Fog light etc. in the future.
Helpful?
Mar 17, 2022
After installing the driver's license camera, I will also install ETC in the future and may buy electric heating wire next season, so I installed it to facilitate wiring.
I was torn between other products in the Series, but I didn't need a constant power supply and I was worried about the shape of the product.
Select this one, which is the simplest, smallest, waterproof, and lowest price.
Since it was after installing the driver's camera, I redid the wiring from the middle of the process and installed it and Refreshing it.
If multiple power distribution is required, it is good because once it is attached, the rest is easy.
Helpful?
New Custom Articles
