It was easy to install, but I was surprised to see the light leaking on the Right
I actually drove the action, but it lit up the oncoming traffic, and I couldn't use it, though
I checked with the Manufacturer and they said, "It's a Universal Product No Support Because we don't have the same vehicle
I cannot check It's "Buyer's Risk except for initial defects"
As a science graduate, I couldn't help but wonder what was wrong with me, so I verified it
As shown in the picture, when I made the shield board large, the light that I was worried about seemed to disappear It is
On the GSX-S1000, unshielded light seems to be a bad thing
I don't want to recommend it to anyone I know because of this Gold amount and no Support
I think the thousands of dollars that are sold on Amazon are better for returns
81.21 EUR (14,025 JPY)
información de entrega
This item is discontinued.
Product detail
luces altas... : 2.150 lúmenes (datos de medición de Daytona)
luz de cruce : 2000 lúmenes (datos de medición de Daytona)
temperatura de color : 6500 Kelvin
Ocho elementos LED de alta luminosidad cada uno de los elementos de alta y baja están dispuestos.
Diseñado de acuerdo con el JIS D5500
Conductor integrado
Grado de impermeabilidad IP65 (sección de ventilador)
longitud total... : 86.2mm
Para el DC 12V
**Este producto es exclusivo para las motocicletas DC 12V con válvulas halógenas.
*Antes de comprar, asegúrese de que la forma y el tamaño de la bombilla coinciden con el tipo de coche que está comprando y que hay suficiente espacio en la caja del faro para que la bombilla se instale. Si su coche tiene el tono de la bombilla de fábrica, tiene que comprobar la distancia a la sombra. Puede ser necesario quitar la pantalla de la bombilla genuina y cambiar el cableado en la caja del faro..
Una evolución adicional de la bombilla del faro LED "Rayo precioso"....
El conductor está encerrado en la válvula para facilitar la instalación..
La amplia distribución de la luz, heredada del campo de fuerza, le permite conducir en la oscuridad con confianza..
El sensor de temperatura incorporado en la válvula controla el aumento de la temperatura del elemento para asegurar una larga vida de la válvula..
El consumo de energía es aproximadamente la mitad de la de las válvulas halógenas. Responde instantáneamente a la luz de cruce para emitir luz sin deslumbrar al tráfico que viene en dirección contraria, o a la luz de carretera que se requiere para la iluminación de alta intensidad.
El pequeño elemento LED, sin lentes y ultrabrillante, con un rendimiento estable y duradero, se coloca en la misma posición que el filamento de la bombilla halógena para mejorar la precisión de la irradiación..
Para enfriar de forma fiable el calor del LED emitido a alta intensidad, la aleta está hecha de aluminio que tiene una excelente capacidad de autodisipación y la aleta está expuesta al viento por un ventilador de alta velocidad que es resistente al polvo y al agua según el IP65 para asegurar la disipación del calor y una larga vida.. El ventilador de alta velocidad también minimiza la caída del flujo luminoso después de unos minutos..
Es posible instalarlo en el CB1300SF (03-17), que tiene una pequeña unidad de faros, sin ninguna modificación, aunque tiene un ventilador de alta velocidad.. Los muelles de la válvula especialmente diseñados se incluyen en el kit y pueden ser intercambiados con los muelles de la válvula de fábrica, por lo que no se requiere ninguna modificación en el cuerpo..
Precaución
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Opiniones de los usuarios
Reviews with image
Feb 24, 2020
I didn't want to keep using it
Dec 20, 2019
Low beam was dark, but I changed it and it got better
The OEM is Halogen and the Low beam is dark, so I replaced it
The space of the headlight is narrow, so the installation was a little large strange, but I was forced to do it It fit without External Blinker Wiring processes the Waterproof Cap by changing the handling It's easy for those who are used to it because it was only put on by the
The brightness is brighter than Halogen and not too bright, so you can run at night without worry The battery voltage is about 0.2V higher than the engine So it might be gentle on the electrical system?
May 6, 2019
Since FJR1300 is a 2-light model and is located at the back of the cowl, replacement is very troublesome The Cowl can be removed, but this time, the meter panel and the cover on the side should be removed and replaced It took me about 3 hours to get the OEM WaterproofRubber installed Since it is not possible, I processed it (cut it into large pieces)
I finally got it installed "Flickering There is a I thought it might be an early failure, but Quantity:2pc. Set both have the same symptoms, so is this a quality in itself?
or Motorcycle compatibility?
I haven't driven at night yet, but how much of a concern is this?
I'm going to check with DAYTONA after the holidays
Feb 4, 2019
As long as it's durable, you're good to go
It's nice to be able to brighten up the headlights easily by just replacing the Valve
Because it is cooling by the fan, it becomes Large by that part, but if it can clear, it is a problem I think it's not
Focus on motorcycles that use light cases such as Cowl-equipped cars and NAKED Therefore, if you have a vehicle with bare wiring or coupler, such as Off-vehicle, you may not be able to use it in rain or car wash i think it will break if it is covered by water in etc
I don't ride when I know it's going to rain, but when I wash the car, I use a Convenience bag or something like that to prevent the water from getting on the car I'm trying to be creative
The glass surface of the headlight does not get hot like a Halogen bulb and saves power I'm glad I installed these parts because they're so much brighter in
The price is high, but the fact that it comes with a one-year warranty is also good
Dec 25, 2018
First impressions upon installation are It's so bright! It was
It is incomparable to a Halogen bulb
I can now drive on the roads at night quite safely
The price is not as high as HIDs, and the life span may be short, but you want brightness easily Then this product is a good buy
The good thing is that there is no ballast and it is very easy to replace
My own Motorcycle has a Cowl, but Access to Light is easy So it didn't take long to convert it
My Motorcycle has a Light that lights up when the key is turned on, so the PC's fan It sounds like a sound, but it doesn't bother me at all once I turn on the Engine
(If you don't engage the Engine, you can't turn on the Light on a motorcycle, you can't hear it at all (There will be none.)
The HID (made by Absolute) lasted 3 years, but how long will the LED light last? What?
The light level may gradually diminish, but hopefully it will last for about two years
Just one thing that bothers me
There seems to be a light leak in the front side of Right Side, and the light is clearly visible in the Tunnel It is
It doesn't seem to fit perfectly against Motorcycle's Reflector shape Maybe it's inevitable to some extent
New Custom Articles
