Installed on TouringSEROW.
Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it all together nicely, even though it was a bit of a puzzle.
When I was checking for any abnormalities at the end, to my surprise, Axel's rotation was stuck!
Apparently, the grips were longer than the OEM grips, and the grips were interfering with the handlebar attachment point on the TouringSEROW equipped hand guard.
It's got a corn expander, but...
There is no choice but to use WasherQuantity between Hand guard and Cone Expander.:1 Set of 2pc. was found and resolved successfully!
The actual Heater, as seen in the previous reviews, is quite warm, and Level 1 of 3 levels is about enough.
We are in a snowy area and don't ride in the winter, so it will be useful in early spring or late fall.
- Instock
124.36 EUR (21,450 JPY)
información de entrega
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
WR250R
07-17 (3D7H)* The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250R
07-17 (3D7J)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250RX
07-17 (3D71)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
-
WR250RX
07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand, so you may feel the temperature difference between the left and right side.
Ver todo
YAMAHA
Product detail
[Manufacturer code]Q5K-YSK-063-Y40
**Cuando uses el calentador de agarre, debes usar los guantes.
*No utilice el calentador de agarre en el ajuste de alta salida cuando la temperatura exterior sea superior a 20°C.
*Si los puños están desgastados o rotos, deja de usar el calentador de puños y reemplaza los puños.
*El MT-07 tiene una especificación de aceleración un 10% más alta que la estándar.
*Acciona el SCR950 después de que el motor se pone en marcha.
*En XT250/XG250, el punto de calor en el lado izquierdo se encuentra en la palma de la mano en lugar de en la punta del dedo, por lo que se puede sentir la diferencia de temperatura entre el lado izquierdo y el derecho.
*XT250/XG250 requiere el Expansor de Cono GH (Q5K-YSK-041-E16) al instalar el protector del volante.
*Necesitas preparar el adhesivo para el agarre izquierdo del manubrio..
¡Confortable y fácil de agarrar en los meses de invierno!
Diseñado específicamente para los vehículos Yamaha para una fácil instalación sin modificar el cableado del vehículo.
[Descripción del producto]
Diseñado específicamente para los vehículos Yamaha para una fácil instalación sin modificar el cableado del vehículo
La empuñadura calefactora de menor diámetro del mundo
El elemento calefactor de acero inoxidable que se calienta uniformemente logra una alta durabilidad..
Ajustes de salida sencillos de 3 etapas: Hi, Mid y Lo (cada nivel de salida puede ser cambiado en incrementos de 10%)
Ajuste automático de la salida del calentador según el voltaje de la batería.
Diseño fiable con protección de la batería.
Precaución
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- SEROW250
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- Tricker (XG250)
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250R
- WR250X
- WR250R
- WR250X
- WR250R
- WR250R
- WR250X
- XT250X
- XT250X
- XT250X
- XT250X
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- XSR700
- XSR700
- XSR700
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- XSR900
- XSR900
- XSR900
- XSR900
- XSR900
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- BOLT C Spec
- SCR950
- SCR950
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- XJR1300
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Opiniones de los usuarios
Reviews with image
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Apr 10, 2022
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Oct 3, 2021
Here are my thoughts on the installation
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!
This time, it was installed in SEROW250!
The most difficult part is to take out the Connector which connects Wiring and put it back in the original position.
this [Color] If you can clear it, the rest is easy.
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Feb 14, 2021
Although the technology is a beginner, it is very easy to install and has excellent performance. It's not uncomfortable off-road, it's not broken. I think it's the right quality for the price.
View DetailFits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Nov 21, 2018
Recently it is essential equipment ? ? ?
Approximately 15 ° C after switching off (No gut w)
Recently it is almost indispensable equipment. I can not get on to no more Motorcycle ww
Honda's Sports Grip Heater also has Button's position at a discreet
It is good, but it is difficult to understand how many steps are in now.
Because Yamaha's Grip heater is a separate switch
It is good to see by checking where you are in three stages now.
Even though it is said to be Large, it is discreet and is attached to the root of Mirror
So it does not get in the way.
Fits:YAMAHA XJR1300 00-15 5EAP, YAMAHA XJR1300 00-15 5EA9, YAMAHA XJR1300 00-15 5EAG, YAMAHA BOLT-C(A) 15-16 (B339)*Please operate the controller after starting the engine because the grip warmer will not be powered unless the headlight is on., YAMAHA WR250R 07-17 (3D72)*The heat spot on the right side is not on the fingertip but on the palm of the hand
Oct 31, 2018
Large success quickly, it was correct and installed.
With this we can ride comfortably this winter as well.
I also considered the Type with Switch in Grip of Other Brand Product, but the product I used before was difficult to operate and it was hard to see the display, so this time I made it as a separate Yamaha OEM Product.
New Custom Articles
