LB7-S LED válvula de la linterna

LB7W-H for Hi side for Headlight of MC41 CBR250R late model (65030) Installed together with
I decided to change to LED bulb because the original H7Halogen bulb was not good for night road.

Aside from the cheap Chinese products, the reason I chose this product was because of its ability to always turn on the Twin Light even in LoBeam by connecting it to the LB7W-H, which is the Hi side.
And that it is a model with a fan that is advantageous for cooling.
It's no exaggeration to say that I spent a large sum of money for these two points.
I heard that it is possible to link with another Manufacturer's Valve, but the Quantity:Pair (for Left and Right) And it's also a different Manufacturer in…(A type

The product has a good texture and is well made, and it feels like an aluminum block that seems to dissipate heat.

The installation itself can be done without any difficulty by looking at the instruction manual and Protec's installation blog.
If I may say so, it is troublesome that I have to cut the connector in front of the body and replace it with a plain type terminal because the product has a three-pole connector instead of a two-pole connector.

Also, the image which can install the Control Unit on the Headlight unit easily is published in the official blog, but because it is necessary to remove the Mirror and to remove Upper Cowl&Headlight unit in order to install it there, the difficulty of installation It is necessary to remove Mirror and Upper Cowl&Headlight unit.
However, when it is the method which pastes it to Side cowl which is in the explanation, when it is MC41 which needs to remove Side cowl in order to do anything, it is necessary to remove Connector every time, because it is not beyond the point of being troublesome, I recommend fixing Control Unit on Headlight unit even if it is troublesome. Recommendation.


The brightness of the light is of course much brighter than the OEM Halogen, and the wide illumination range makes night driving much easier. This is a very expensive manufacturer's product.


As the purchase privilege WedgeValve for the Position of LED which is sold with a little more than 2000 was attached, but because it was the superb Garbage condition that it did not light when it inserted to the depths in the Socket by no means, it threw away. (Quantity:Pair (for Left and Right) Neither does the same LED Bulb that came with the Hi side)


If your budget permits, this is the recommendation because it has the brightness and performance as a general high-grade LED bulb and the reliability that it survived the heat wave of midsummer without plunging into dangerous temperature.

The rest is Quantity:Pair (for Left and Right) If the price is acceptable in ….

Ninja1000 - I installed it in MODEL 2014. Each Manufacturer has devised a heat dissipation part, but it seems that everyone is struggling with it in the installation by interfering with it. I bought this product because it was devised so that the heat radiation component can be removed once and attached. It is a Universal Product, but it was easy to install as Ninja 1000 Exclusive Design, so processing was not necessary in particular (The box is stated as Ninja 1000 conformity).

Brightness is switching from high efficiency Valve, but it is a marginal brightness. The feeling of security at nighttime is different.
However, when installing, it is better to wipe off the heat conduction Grease applied between Valve and the cooling fan once. Grease comes with hands in a narrow place and Grease sticks to surrounding Wiring. Since heat conductivity Grease is bundled and there is an instruction to apply it additionally also in Instruction Manual, it should be no problem if firmly applying at cooling fan reattachment. Therefore, the evaluation of installation was set to 4. The other thing is whether the automobile inspection passes.