Installation : The model is XL 700 V (TRANSALP) Mount installation is probably only about 2 to 3 hours if this Top case alone. Since it was necessary for me to remove Fide for Side case, it is about half a day. If you do according to instruction manual there will be no mistakes. Installation of the Top case is made by other Manufacturer (Krauser) It is a bit harder than hang is needed compared to.
function : It is convenient to open only a part of the upper cover when it is a bit of shopping or when it is raining. Just, the upper pig's Quantity : Pair (for Left and Right) It is a bit annoying that there is an auxiliary lock on the.
shape : The Krauser I used before was a round design, so the loading of the inside was bad, but this TREKKER is close to a rectangular parallelepiped and the storage is happy. It is as expected as this was the reason for choice.
Disadvantage : Although it is not due to this TREKKER, Same number key can not be used because the key type is different from GIVI E 21 used for Side case. I hope the new and old Key type can be replaced. Silver (Aluminum exterior) Easy to scratch ? Because there is a dent, people who care about that may be better to choose Black. In the case of me, I also added Metal rack to protect the Aluminum armor on the top.
275.17 ~ EUR (47,464 JPY) 336.25 EUR Save 18%
información de entrega
-
Please select product form first.
FITMENT
-
400X
13-14 [M5 Base (90140) + Monorack Fitting 1121FZ (79980)] *CB500X for Europe *Not tested for 15-model (domestic spec) and 16-model (LED headlight standard)
-
CB1000R
08-16 Europe [M5 Base (90140) + Monorack Fitting 266FZ (69351)].
-
400X
13-14 [M7 Base (91332) + Monorack Fitting 1121FZ (79980)] *CB500X for Europe *Not tested for 15-model (domestic spec) and 16-model (LED headlight standard)
-
HORNET900
02-07 [M7 base (91332) + fitting for monorack 256FZ (93055)].
Ver todo
HONDA
-
FAZER8
10-15 (with front cowl)[M7 base (91332) + Monorack fitting 366FZ (74369)].
-
XSR900
16 [M7 base (91332) + fitting for monorack 2115FZ (91777)].
-
XSR900
16 [M5 base (90140) + fitting for monorack 2115FZ (91777)].
-
FAZER8
10-15 (with front cowl)[M5 base (90140) + Monorack fitting 366FZ (74369)].
Ver todo
YAMAHA
-
BANDIT650S(GSF650S)
09-14 k9/l0-4 european specification [m7 base (91332)] *09- model does not fit the K7-8 model which was sold continuously.
-
BANDIT650S(GSF650S)
09-14 K9/L0-4 European specification [M5 base (90140)] *09- models do not fit the K7-8 models which were sold continuously.
-
BANDIT650S(GSF650S)
05-06 European specifications [M7 Base (91332) + Monorack Fitting 539FZ (94033)
-
BANDIT650S(GSF650S)
05-06 European specifications [M5 Base (90140) + Monorack Fitting 539FZ (94033)
Ver todo
SUZUKI
-
ER-4n
11-13 [M7 base (91332) + fitting for monorack 449FZ (94052)
-
ER-4n
11-13 [M5 base (90140) + fitting for monorack 449FZ (94052)
-
ER-6n
09-11 European specifications [M7 Base (91332) + Monorack Fitting 449FZ (94052)
-
ER-6n
09-11 European specifications [M5 Base (90140) + Monorack Fitting 449FZ (94052)
Ver todo
KAWASAKI
-
MONSTER1100EVO
11-12 [M7 base (91332) + monorack fitting 780FZ (95268)].
-
MONSTER1100EVO
11-12 [M5 base (90140) + Monorack fitting 780FZ (95268)].
-
MONSTER696
08-14 [M7 Base (91332) + Monorack Fitting 780FZ (95268)
-
MONSTER696
08-14 [M5 Base (90140) + Monorack Fitting 780FZ (95268)
Ver todo
DUCATI
-
F650 GS
00-03 00/8-03[M3 base (90090) + fitting 639F (40130) for monorack].
-
C650 Sport
16 [m7 base (91332)]]
-
K1200GT
03-04 [M3 Base (90090) + Monorack Fitting 680F (94814)] * Fits only to vehicles equipped with stock rear handle (U-shape) Not for vehicles equipped with stock luggage rack.
-
F650GS Dakar
00-03 00/8-03[M3 base (90090) + fitting 639F (40130) for monorack].
Ver todo
BMW
-
1290 SUPER ADVENTURE
15-16 [M7 Base (91332) + Tubular Pannier Holder SR7705 (93143)
-
1290 SUPER ADVENTURE
15-16 [M5 Base (90140) + Tubular Pannier Holder SR7705 (93143)
-
690DUKE
13-16 [M7 base (91332) + fitting for monorack 7702FZ (91361)].
-
690DUKE
13-16 [M5 base (90140) + fitting for monorack 7702FZ (91361)].
Ver todo
KTM
-
SPRINT ST
05-11 1050 [M7 Base (91332) + Monorack Fitting 726FZ (68189)] *Not for Sprint GT 1050 (10-)
-
SPRINT ST
05-11 1050 [M5 Base (90140) + Monorack Fitting 726FZ (68189)] *Not for Sprint GT 1050 (10-)
-
STREET TRIPLE
07-12 675 [M7 Base (91332) + Monorack Fitting 727FZ (68187)].
-
STREET TRIPLE
07-12 675 [M5 Base (90140) + Monorack Fitting 727FZ (68187)].
-
SRV850
12-16 [M5 Base (90140) + Special Rack SR6708 (91708)].
-
SHIVER 750
10-15 ABS [M7 Base (91332)].
-
SRV850
12-16 [M7 Base (91332) + Special Rack SR6708 (91708)].
-
SHIVER 750
10-15 [M5 Base (90140)]]
Ver todo
APRILIA
-
BREVA V750
03-12 [M3 base (90090) + fitting 703F (94527) for monorack].
Product detail
Capacidad]46 litros
Peso máximo de carga] 10kg *En Daytona, se recomiendan 3kg o menos para la maniobrabilidad.
Peso corporal] 5,7 kg
Tamaño]Profundidad 411 x Anchura 526 x Altura 310mm
Material/Material] Cuerpo : PP, Superficie de la cubierta superior : aluminio
[Especificaciones]
No hay luz de freno
Para ambos lados de la parte superior y lateral
**No exceda el límite de carga de los accesorios.
*Para la maniobrabilidad, recomendamos no más de 3 kg en Daytona.
*No se puede fijar a una base con contactos.
*El casco puede no ser capaz de ser guardado dependiendo de su tamaño.
*La parte de aluminio de la cubierta superior está mecanizada a partir de una placa, por lo que puede haber rastros de procesamiento.
*Los no pintados tienen una superficie rugosa porque no han sido tratados.
*El juego de llaves debe ser del mismo tipo que el que está usando ahora. Para el juego de llaves de repuesto, por favor consulte "Partes para el caso de GIVI".
*La caja está diseñada para ser impermeable, pero no es completamente impermeable. En particular, si se utiliza el caso TRK33/TRK46 como caso secundario, la posibilidad de que el agua penetre en el caso es alta. El contenido de la caja debe ser totalmente impermeable.
*Los números de parte, precios y especificaciones de los productos de este sitio web están sujetos a cambios sin previo aviso..
El debut de la serie TREKKER. Diseño robusto e intrépido con partes de aluminio. Hay 2 tipos de apertura disponibles.
 |
 | |
 | ||||||||
 |  |  |  | |||||
| Inserte la llave en el cilindro de la llave.. | Gire la llave a la derecha (3 en punto).. | Presiona el botón oval rojo en la parte superior del cilindro de la llave. | La solapa que dice "PRENSA" flota hacia arriba.. | |||||
 | ||||||||
 |  |  | ||||||
| Asegúrate de que la llave se introduce y se gira a la derecha (3 en punto).. | Con la llave girada a la derecha (3 en punto), bloquee la llave presionando la parte superior del triángulo de "PRENSA" (marca *).. | Una vez que la tapa esté cerrada, gira la llave a la izquierda (12 en punto) para bloquear los botones.. Si se quita la llave en este estado y se cierran todos los botones, la tapa no puede abrirse ni cerrarse.. Después de esto, asegúrate de levantar la tapa un poco más fuerte y asegúrate de que esté bien cerrada.. | ||||||
 | ||||||||
| Si el botón rojo del cilindro de la llave no se puede desbloquear pulsando el botón rojo (la solapa no se abre), el botón rojo se ha replegado hacia atrás (la solapa está medio bloqueada).. En ese caso, siga los pasos siguientes para liberarla.. |  |  | ||||||
| Cómo desbloquear la solapa en un estado de semi-cierre | ||||||||
 |  |  |  | |||||
| La tapa no se cierra cuando la tapa está medio cerrada.. Encontrarás algo de resistencia, pero tendrás que tirar fuerte para abrir la tapa.. | Retire la tapa para revelar la solapa de la sección de cierre.. | Incline esa solapa hacia atrás.. | El colgajo vuelve a su posición fija y se puede liberar el estado de semicerrado del colgajo.. | |||||
 | ||||||||
| Con la carcasa superior abierta, coloque la carcasa en la base y bloquéela con la mano derecha presionando la parte inferior de la carcasa con la mano derecha mientras levanta la base con la mano izquierda.. Asegúrate de instalarlo de esta manera, especialmente en los coches pequeños, ya que la suspensión trasera es blanda y puede ser difícil de bloquear con seguridad con sólo presionarla desde arriba.. |  |  | ||||||
| Cómo desbloquear la base | ||||||||
| Después de cerrar la caja en la base, asegúrese de comprobar el estado de cierre tirando de la caja hacia arriba.. Si la posición del botón se retrae unos 6 mm más que la posición normal (estado de semicerrado de la base), la caja no se cierra normalmente en la base.. Para liberar la caja, presione el botón de extracción de la caja con fuerza de nuevo y retire la caja de la base y vuelva a instalarla con seguridad.. | ||||||||
 |  |  Cuando se presiona el botón, se retrae unos 6 mm más que en el estado normal de bloqueo.. | ||||||
MODEL PAGE LINKS
- HORNET250 (CB250F)
- HORNET250 (CB250F)
- CB400X
- CB400X
- CB500 Four
- CB500X (500X)
- CBF500
- CBF500
- CBF600
- CBF600
- CBF600S
- CBF600S
- CBR600F
- CBR600F
- CBR600F
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- HORNET600 (CB600F, 599)
- Hornet 600S
- Hornet 600S
- CB650F
- CB650F
- CBR650F
- CBR650F
- CTX700
- CTX700
- CTX700N
- CTX700N
- NC700S
- NC700S
- NC700X
- NC700X
- INTEGRA
- INTEGRA
- CB750
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750S
- NC750X
- NC750X
- NC750X
- NC750X
- NC750X
- NC750X
- NC750X
- NC750X
- VFR750F Interceptor
- VFR750F Interceptor
- NC750 Integra
- NC750 Integra
- NC750 Integra
- NC750 Integra
- VFR800 Interceptor
- VFR800 Interceptor
- VFR800 Interceptor
- VFR800 Interceptor
- VFR800F
- VFR800F
- VFR800X CROSS RUNNER
- VFR800X CROSS RUNNER
- VFR800X CROSS RUNNER
- VFR800X CROSS RUNNER
- VFR800X CROSS RUNNER
- VFR800X CROSS RUNNER
- HORNET900 (CB900F, 919)
- HORNET900 (CB900F, 919)
- CB1000R
- CB1000R
- CBF1000F
- CBF1000F
- CBF1000F
- CBF1000F
- CRF1000L Africa Twin
- CRF1000L Africa Twin
- CRF1000L Africa Twin
- CRF1000L Africa Twin
- VTR1000F Firestorm (SuperHawk)
- CBR1100XX Super Blackbird
- VFR1200F
- VFR1200F
- CB1300SF (Super Four)
- CB1300SF (Super Four)
- CB1300SF (Super Four)
- CB1300SF (Super Four)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
- CB1300SB (Super Bol D'or, CB1300S)
- FZ6N
- FZ6N
- FZ6 S2
- FZ6 S2
- FZ6 FAZER S2
- FZ6 FAZER S2
- FZ6 FAZER
- FZ6 FAZER
- FZS600 FAZER
- XJ600 (FJ600)
- XJ600 (FJ600)
- XJ6 Diversion
- XJ6 Diversion
- XJ6 Diversion
- XJ6 Diversion
- XJ6 Diversion
- XJ6 Diversion
- XJ6 Diversion F
- XJ6 Diversion F
- YZF600 THUNDER CAT
- MT-03
- MT-03
- MT-03
- MT-03
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- MT-07 (FZ-07)
- FZ8 (FZ8N)
- FZ8 (FZ8N)
- FAZER8 (FZ8S)
- FAZER8 (FZ8S)
- TDM850
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 (FZ-09)
- MT-09 TRACER (FJ-09)
- MT-09 TRACER (FJ-09)
- TDM900
- XSR900
- XSR900
- MT-10 (FZ-10)
- MT-10 (FZ-10)
- FZS1000 FAZER
- FZS1000 FAZER
- FZS1000 FAZER
- FZS1000 FAZER
- BT1100 BULLDOG
- BT1100 BULLDOG
- FJ1100
- FJ1200
- XJR1200
- XJR1300
- XJR1300
- XJR1300
- XJR1300
- Inazuma400 (GSX400 Inazuma)
- GS500
- GS500
- GSX600
- GSX600
- GSX600
- BANDIT600 (GSF600)
- BANDIT600 (GSF600)
- Bandit600S (GSF600S)
- Bandit600S (GSF600S)
- GSX650F
- GSX650F
- SV650
- SV650
- SV650
- SV650
- SV650S
- SV650S
- BANDIT650 (GSF650)
- BANDIT650 (GSF650)
- BANDIT650 (GSF650)
- BANDIT650 (GSF650)
- BANDIT650 (GSF650)
- BANDIT650 (GSF650)
- Bandit 650S(GSF650S)
- Bandit 650S(GSF650S)
- Bandit 650S(GSF650S)
- Bandit 650S(GSF650S)
- Bandit 650S(GSF650S)
- Bandit 650S(GSF650S)
- GSR750
- GSR750
- GSX750F
- GSX750F
- GSX750F
- INAZUMA750 (GSX750)
- GSX-S1000
- GSX-S1000
- GSX-S1000F
- GSX-S1000F
- SV1000
- SV1000
- SV1000S
- SV1000S
- GSF1200 (Bandit)
- GSF1200S (Bandit)
- INAZUMA1200 (GSX1200)
- Bandit1200 (GSF1200)
- Bandit1200S (GSF1200S)
- Bandit1250 (GSF1250)
- Bandit1250 (GSF1250)
- Bandit1250F (GSX1250F)
- Bandit1250F (GSX1250F)
- Bandit1250S (GSF1250S)
- Bandit1250S (GSF1250S)
- GSX1300R HAYABUSA
- GSX1300R HAYABUSA
- GSX1400
- GSX1400
- Z250 (2013-)
- Z250 (2013-)
- Z250 (2013-)
- Z250 (2013-)
- NINJA250 (EX250)
- NINJA250 (EX250)
- NINJA250 (EX250)
- NINJA250 (EX250)
- Z300
- Z300
- ER-4n
- ER-4n
- ZZR400
- NINJA400 (2014-)
- NINJA400 (2014-)
- NINJA400R (ER-4f) (-2013)
- NINJA400R (ER-4f) (-2013)
- ZZR600 (Ninja600, ZX-6E)
- ER-6f (Ninja650)
- ER-6f (Ninja650)
- ER-6f (Ninja650)
- ER-6f (Ninja650)
- ER-6n
- ER-6n
- ER-6n
- ER-6n
- VERSYS650
- VERSYS650
- VERSYS650
- VERSYS650
- VERSYS650
- VERSYS650
- Z750 (Liquid cooled)
- Z750 (Liquid cooled)
- ZR-7/S
- ZR-7/S
- Z800
- Z800
- Z1000 (Water-cooled)
- Z1000 (Water-cooled)
- Ninja1000 (Z1000SX)
- Ninja1000 (Z1000SX)
- ZRX1100
- ZRX1100II
- ZZR1100 (ZX-11)
- ZZR1100 (ZX-11)
- ZRX1200R
- ZRX1200S
- ZRX1200 DAEG
- ZRX1200 DAEG
- ZZR1200
- ZZR1200
- ZZR1400 (ZX-14 Ninja)
- ZZR1400 (ZX-14 Ninja)
- Ninja ZX-14R (ZZR1400)
- Ninja ZX-14R (ZZR1400)
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Opiniones de los usuarios
Reviews with image
Fits:APRILIA SHIVER 750 10-15 ABS [M5 Base (90140)]., HONDA NC750S 16 LED Headlight Standard [M7 Base (91332) + Monorack Fitting 1146FZ (94455)]., HONDA CB500S 00-05 [M3 base (90090) + fitting for monorack 250F (94280)]., HONDA CB1300SUPER BOLDOR 10-16 [M7 base (91332) + fitting for monorack 268FZ (94007)] *Not for CB1300ST (10-11), KAWASAKI Z1000 07-09 (Water-cooled) [M7 Base (91332) + Monorack Fitting 448FZ (79287)].
Sep 2, 2018
Fits:APRILIA SHIVER 750 10-15 ABS [M5 Base (90140)]., HONDA NC750S 16 LED Headlight Standard [M7 Base (91332) + Monorack Fitting 1146FZ (94455)]., HONDA CB500S 00-05 [M3 base (90090) + fitting for monorack 250F (94280)]., HONDA CB1300SUPER BOLDOR 10-16 [M7 base (91332) + fitting for monorack 268FZ (94007)] *Not for CB1300ST (10-11), KAWASAKI Z1000 07-09 (Water-cooled) [M7 Base (91332) + Monorack Fitting 448FZ (79287)].
Oct 14, 2015
OEMSIDEPannier became insufficiently capacitive and Material : Because I was concerned about Plastic installation Mount, Quantity : Pair (for Left and Right) Both purchase 46Type L. Overwhelming loading capacity and full width (Less than 1200 mm) Is available.
Case is pretty well done and very easy to use. Moreover, Large capacity which can also store OffHelmet of XXL!.
With Givi's strongest if the installation Frame is OK now.
Fits:APRILIA SHIVER 750 10-15 ABS [M5 Base (90140)]., HONDA NC750S 16 LED Headlight Standard [M7 Base (91332) + Monorack Fitting 1146FZ (94455)]., HONDA CB500S 00-05 [M3 base (90090) + fitting for monorack 250F (94280)]., HONDA CB1300SUPER BOLDOR 10-16 [M7 base (91332) + fitting for monorack 268FZ (94007)] *Not for CB1300ST (10-11), KAWASAKI Z1000 07-09 (Water-cooled) [M7 Base (91332) + Monorack Fitting 448FZ (79287)].
Dec 19, 2011
It has attached to YAMAHA FJ1100.
The fitting and the base only for a vehicle type were also purchased simultaneously, and the size larger so that it can use general-purpose was chosen.
It is because the form where it is square having used TRK and it is truly likely to be easy to put in a thing is pleasing.
Although it became a style somehow like a delivery service by motorcycle, practicality is enough and it has satisfied it.
New Custom Articles
