Kit de faro HID para perno

I arrived today.. It opened in about 2 hours and the work was completed.
Exclusive Design Why was it possible to install without any difficulty.
Do not disassemble Cowl Body, you can work only by removing Inner cowls and Meter. Also, if you leave Screen, you can get both hands in Cowl and increase working efficiency.

I adjusted the optical axis at the end of the work, but I made a slight adjustment. In other words, if the adjustment on the low side is lessened, the optical axis will not go too much on the high side.

I tried taking the image with NORMALHalogen and HID with the same setting.

Aperture f / 3. 2 Exposure 1 / 30 seconds ISO 400 Focal length 15 mm

HID, it is too bright, completely white jump.

Although a GSX1300R HAYABUSA's Halogen is also bright enough, since [ appearance ], HID is purchased with the reduction of incidence to a Battery.Since a large number [ the report in which a Meter malfunctions ] when it was cheap HID, the high Absolute of a track record is chosen.A price differs in a beam.There is only a price and the abnormalities of a Meter are completely nothing! With [ although the automobile inspection was anxious in 6500 K ] no problem.It is the pure style [
attachment ] and is a Bolt on mostly.It is unavoidable kana when you would like to want to attach finely and to enjoy a Touring in comfort.

HID-ization was crossed into the hayabusa from before this time [ preparations ].
Although HID had various makers, it was made absolute:Absolute which is reliable and has a HID kit classified by vehicle type, etc.
Although it wavered [ Into which is 4300K made / 6500K or /? ], since 4300K is stronger to rain etc. and safety was high, it chose here.
It is said that it will be 6500K if it goes by appearance serious consideration, but there is a time of not passing since an inspector decides an automobile inspection by visual observation although it passes rarely.
About attachment, when removing the circumference of a lower cover, an upper cover, a fairing cover on either side, a meter, and an undercover (it appears in owners manual) meter, it has attached.
After attachment, although it ran night, it was shocked.
the difference with HID came out that it was pure clearly, and the night journey looked good.
Although it is expensive, there is merely value more than a price.

It is natural that we purchased exclusive items for car models, but installation is considered different from other universal products.
Because manuals are stated firmly, I think that it will not get lost as long as there is nothing quite right.
Igniteretc. Equipment can also be installed where it does not take up space, so I think that less load is reduced under less Seat.

Durability is also evaluated in 3 years, but there is nothing wrong and light intensity is sufficiently bright compared with OEM.

[Webike-monitor] brightness thought --- [ brightness ] with getting used to Colet, since * vehicle which is the highest truly is also HID with halogen, and it purchased it.
Since the vehicle type was merely SS although it is a bolt on kit, it was quite severe in mounting space.
Are a little questions among the points called ... on a cowl desorption level?
Since the drilling process of 16.5 phi is required, I think that technology is required in the tool of there there.
It became somewhat tight, when a right-hand side controller had a somewhat bad settlement and returned a cowl.
In addition, it is somewhat regrettable that power-source extraction puts and it is a tap.
I think that it is the highest more if the hit is also a harness arranged by coupler on.