Inclinación del estribo

Nice finishing and helps to save ~400gram from the stock footpeg. Also allow you to have 3 foot position options. I use the stock position.

I was not happy with the squishiness of the OEM footpeg, so I removed the footpeg rubber, but I felt uncomfortable with the position, so I bought this product which has a good product review.
First of all, the removal of the OEM footpeg requires the use of a socket wrench because there are some places where a Glasses Wrench will not fit.
Since Screw lock agent is applied to the bolt, beginners need to be careful not to nudge it.
The Left Shift side doesn't translate, but the problem is the Right SideBrake pedal side.
I removed the adjustment Nut on the Brake pedal to allow the Pedal to move Free to create Space for the tool.
Installation can be done easily by reading the included instruction manual, but considering the vibration of the single cylinder engine and the fact that the OEM footpeg screw lock agent was applied, we recommend the application of a medium-strength screw lock agent from GACHI Screwetc.
As for Position, I was impressed with how different it was when I test drove it. I was impressed. No problem in terms of strength.
I think it is a good product with good machining accuracy for the price.

[How is it used?
Installed on FTR223.
Applications:City driving, Touring, Circuit driving
Used for about 4 years.

Was the one you received as per Image?
Image is correct. I felt that if I installed the footpeg at the highest and most back position, it would not rub even if I banked deeply.

Was the installation difficult?
I remember that the OEM footpeg mounting bolt was very tight and I had to add a pipe to the Hexagonal Wrench and step on it with my foot to loosen it.
For installation, the Instruction Manual is well prepared and can be read without any problems.

How was your experience with it?
This is one of the few options for Rear Sets on the FTR223.
As mentioned earlier, when I installed the footpeg at the highest and most back position, I did not have any footpegs even when I banked deeply in Circuit driving.
Also, the footpeg did not bend when I fell over.
The surface of the footpeg was well processed, so that it could be stepped on firmly. Thanks to this, I was able to put a good load on the footpegs and create a good trigger for cornering.
The strength of the anodized is also good, and I have used it for about 4 years and it has never peeled off.
In general, I was satisfied with the Large custom parts.

[Included Parts:were they on?
Please refer to the product description image.

[Was there anything that disappointed you?
None in particular

Point and hang of installation
Although I didn't use it when I installed the footpeg, I used a medium strength screw lock to prevent the bolt that holds the footpeg from falling off or loosening. (Locktite, THREEBOND, GACHI Screw, etc. anaerobic adhesives) I think it's a good idea to use
Also, the tools used are the Spinner Handlebar for removing the OEM footpeg and for final tightening. (Breaker bar) I think it's best to use a hex socket bit and a hexagonal socket bit so that you can apply a torque.

I bought it at the opportunity that the Rubber part of the OEM's footpeg felt scared as Gniguni.

Because it ceased to be Rubber, vibrations transmitted to the sole became Large, but you can firmly step on the sole and adjust the position, making Knee grip easier.
And easy to install anything more than anything else.

It is footpeg which you can strongly recommend.

It is a product which can adjust three steps of step positions by liking of it.Since I set the Step to the upper row, in addition to some Back, the position of a Step also becomes high from a Normal step.Having carried out
run and having felt changes entirely how to be that the step position became high and ride with former also including a Position & Knee grip rather than the position of the Step having retreated.It becomes touch sportier than
and, of course, can also earn an angle of bank.Moreover, appearance also changes a lot, and since the Quality as a product is also high, there is satisfaction.Although the
Step is not a retractable type but a stationary type, it does not become a problem in particular by operativity.It is whether a Step breaks at the time of a fall.Still attractive looks and operativity are expectable.