6.85 EUR
(1,121 JPY)
5 (10 opiniones)
Very Good
Hand is dirty and convenientIt is useful because it does not pollute your hands when working something.
It is easy to break, but it does not matter because there are many sheets.
Since it extends to a certain extent, I wear it from the top of Mechanic Gloves and I am doing ChainMaintenance.
Reviews For REIT Guantes de nitrilo Especificación muy pálida sin polvo From Other Webike User
Excellent
I should have bought it and used it sooner.I bought it after seeing others use it because I have very rough hands.
It gets steamy inside, but it's very convenient because it doesn't get any bad grease stains.
The roughness of my hands has also decreased dramatically.View Detail
Very Good
It keeps your hands clean and free of stains, etc.I started to use this product because I was worried about the dirt and oil in my nails after doing maintenance on my motorcycle.
At first I thought it would be difficult to use for maintenance of the details, but it feels good and there is no problem.
I think people have different opinions on whether there is no powder or with powder, but the feeling of using both types is that there is no need for a powder type. No problem at all.
As long as there are no holes in it, you can use it, so it's cost-friendly.View Detail
Excellent
You should basically always use it when it's availableYou can work without it, but you can keep your hands clean by having it
By using this, you won't hesitate to maintain areas that you would otherwise ignore because you don't want to get your hands dirty I think the most important thing is that it can be done
Clean the inside of the Sprocket Cover during maintenance of the Chain Check the lock nut for looseness, or see if there is any abnormality in the movement of the bearing when the wheel is attached or removed and apply the proper grease when tightening shafts and screws When I think about such a basic thing as painting and getting my hands dirty, I skip the Large body and It is
For now, the maintenance can be done without getting your hands dirty, so it's even worse than before
You're resisting the fact that your nails turn black and don't fall off easily, but these Items are If you don't use it at all, don't touch the small points in the case of a large body and the parts that are badly greased I think we often leave it at that
It's not that you can't or don't know, it's that you can't do it, but it's also that you're trying to kill the elements that make you not want to do it Don't be stingy with Items
If you're simply too lazy to check those points in the first place, you can pay your Gold properly and It's better to have a motorcycle shop perform regular inspections and maintenanceView Detail
Very Good
DIYWhen working with bare hands, the fingertips turn black and the parts cleaner and so on
It tended to cause skin irritation, perhaps because of the Chemical
Gloves for military and maintenance work are rather thick, or have extra fingertips, etc
Especially when turning the Screw, there was no way to get in the way, so I ended up taking it off and working on it
In the midst of all this, the president of a certain ZEPHYRCustom and famous shop recommended it to me
It was a rubber glove like these medical type?
Basically, it is thin and has an excellent fit feeling, so once you get used to it, you can do maintenance work with almost the same feeling as with bare hands Even if you get dirty with oil and chemicals, there is no problem, and the unit price per piece is also cheap, so if you are worried about it, you can throw it away You can change to a new one by hand and you're good to go
The only drawback, if I may say so, is that it's thin, so it's not surprising, but I'm touching something hard, such as Screw And it is to be torn up rather easily In that case, just because you only have to change it to the new one without being stingy, it is not a problem which is not so Large None
Order something (especially if you're working on it yourself) and buy it together and you can't go wrong
By the way, I'm buying the M size
Basic M to (S) size is used for both Motorcycle Gloves and General useView Detail
Very Good
It's a good thing They are badAfter using one box, the warmed-up waste oil (Engine oil) It doesn't tear even if you stick it into a bag, and the fit feeling is good I have no complaints about the use of this product
The disadvantage is the number of competitors' products, which are sold at lower prices in various home centers, etc Many of them are Ease of removal from the box is sometimes a winner, so we should look at cost or ease of useView Detail
Most Viewed Reviews Of REIT Nitrile Gloves
Average
For disposables.It's nice to have a lot in there so if it gets dirty or torn, there's always the next Stock right away. Unlike the military gloves, these are rubber so oil won't soak into them, so they are easy to remove with parts cleaners and the like.View Detail
Average
Maintenance.Whether it's Chain cleaning, Caliper cleaning, or Oil replacement.
When I service a motorcycle, I usually get my hands black and dirty.
Also, I always wear these Nitrile gloves because I have rough hands, so I always wear these Nitrile gloves.
This is an ultra-thin type, so the fit feeling is excellent and it doesn't interfere with the feel of a military hand.
If I wanted to, I'd say it's a leveler that doesn't matter if it's hot or if your hands feel steamy, but I think it's a leveler that doesn't matter.View Detail
Excellent
I should have bought it and used it sooner.I bought it after seeing others use it because I have very rough hands.
It gets steamy inside, but it's very convenient because it doesn't get any bad grease stains.
The roughness of my hands has also decreased dramatically.View Detail
Very Good
It keeps your hands clean and free of stains, etc.I started to use this product because I was worried about the dirt and oil in my nails after doing maintenance on my motorcycle.
At first I thought it would be difficult to use for maintenance of the details, but it feels good and there is no problem.
I think people have different opinions on whether there is no powder or with powder, but the feeling of using both types is that there is no need for a powder type. No problem at all.
As long as there are no holes in it, you can use it, so it's cost-friendly.View Detail
Excellent
You should basically always use it when it's availableYou can work without it, but you can keep your hands clean by having it
By using this, you won't hesitate to maintain areas that you would otherwise ignore because you don't want to get your hands dirty I think the most important thing is that it can be done
Clean the inside of the Sprocket Cover during maintenance of the Chain Check the lock nut for looseness, or see if there is any abnormality in the movement of the bearing when the wheel is attached or removed and apply the proper grease when tightening shafts and screws When I think about such a basic thing as painting and getting my hands dirty, I skip the Large body and It is
For now, the maintenance can be done without getting your hands dirty, so it's even worse than before
You're resisting the fact that your nails turn black and don't fall off easily, but these Items are If you don't use it at all, don't touch the small points in the case of a large body and the parts that are badly greased I think we often leave it at that
It's not that you can't or don't know, it's that you can't do it, but it's also that you're trying to kill the elements that make you not want to do it Don't be stingy with Items
If you're simply too lazy to check those points in the first place, you can pay your Gold properly and It's better to have a motorcycle shop perform regular inspections and maintenanceView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING