21.79 EUR
(3,567 JPY)
5 (6 opiniones)
Excellent
Can be used with both Aluminum and Steel HandlebarsThis bar end slider is zeta. 2007 wr250X was originally OEMSteel handlebar, now it is zetacomp bar. Now it is zetacomp bar, and it is possible to install it with either handlebar because two kinds of Adapters were attached.
Reviews For ZETA Bar End Slider From Other Webike User
Excellent
Отличные грузыХороший, качественный продукт, установил его на Kawasaki ZRX1200DAEG, руль не оригинальный. Хорошая фиксация, легкая установка. Прошу обратить внимание что грузы пластиковые и как грузы они не работают. Я установил их в качестве слайдеров слайдеров. Выглядят очень красиво. Рекомендую.Khoroshiy, kachestvennyy produkt, ustanovil yego na Kawasaki ZRX1200DAEG, rul' ne original'nyy. Khoroshaya fiksatsiya, legkaya ustanovka. Proshu obratit' vnimaniye chto gruzy plastikovyye i kak gruzy oni ne rabotayut. YA ustanovil ikh v kachestve slayderov slayderov. Vyglyadyat ochen' krasivo. Rekomenduyu.さらに表示285/5000A good, quality product, installed it on the Kawasaki ZRX1200DAEG, the steering wheel is not original. Good fixation, easy installation. Please note that the loads are plastic and they do not work as loads. I set them as sliders for sliders. Looks very beautiful. Recommend.translated by Google TranslatorView Detail
Excellent
MOTARD, I know you're persistent about Motocross, but it's a zeta?This time I'm going to make sure I get a good in-person picture of it installed?
In my last post, I told you how good these Items are only in writing, but a picture is worth a thousand words?
Take a look at the images, this feeling of unity with the Grip without any discomfort and the cool appearance of the Slider.
The Potential that has the concealed potentiality exudes like SNIPER of great skill. zetaBrand is great.View Detail
Excellent
Same size as the Grip diameter.I'm using it on a 2007 wr250x, MOTARD, ZETA for Motocross.
The thickness of the slider is about 3cm, so the slider does not stand out even if you wear it, and the matte black color with the Manufacturer logo stands out very well.
We like the wr250x OEM steel Handlebar, and the good thing about the Slider is that it is available in two different materials (steel handle and aluminum handlebar) to fix either steel or aluminum handlebar.:It comes with an aluminum fixture. It is not likely to come off like the other Bar Ends when it is tipped over like the Rubber Bush. (The fixing method is the same.) I was using it heavily with Motocross and HardEnduro, but it did its job well, and it didn't come off when I fell over, and the Handlebar protected the Throttle tube and Grip even when the Handlebar bent, so I was able to survive on my own. I am a great believer in the zeta Bar EndSeries. It's probably the cheapest bar end slider on the market, but the performance is unmistakable.View Detail
Very Good
as expected (as opposed to expected)Since the ZETAHandlebar was installed in MT-03, I tried to make the Bar End also ZETA I did
It's the same Manufacturer, so the fitment is perfectly fine
Other Manufacturer's Tightening Rubber Spreads Type, Not Spreads I think there is little worry about it falling out because the part is aluminum
It is so light that it is useless as a weight, so be careful Note that I don't have any problems with the MT-03, especially with the vibration of the HandlebarView Detail
Average
Would you prefer a little longer? (^^)I installed it together with 1 year inspection (^^)
I think it was a bit smaller than Image.
If Balance is good as long as it is long (⌒-⌒;)
However, I will do my best not to take care of me (≧ ∀ ≦)View Detail
Most Viewed Reviews Of ZETA Other Bar End Options / Repair Parts
Excellent
Отличные грузыХороший, качественный продукт, установил его на Kawasaki ZRX1200DAEG, руль не оригинальный. Хорошая фиксация, легкая установка. Прошу обратить внимание что грузы пластиковые и как грузы они не работают. Я установил их в качестве слайдеров слайдеров. Выглядят очень красиво. Рекомендую.Khoroshiy, kachestvennyy produkt, ustanovil yego na Kawasaki ZRX1200DAEG, rul' ne original'nyy. Khoroshaya fiksatsiya, legkaya ustanovka. Proshu obratit' vnimaniye chto gruzy plastikovyye i kak gruzy oni ne rabotayut. YA ustanovil ikh v kachestve slayderov slayderov. Vyglyadyat ochen' krasivo. Rekomenduyu.さらに表示285/5000A good, quality product, installed it on the Kawasaki ZRX1200DAEG, the steering wheel is not original. Good fixation, easy installation. Please note that the loads are plastic and they do not work as loads. I set them as sliders for sliders. Looks very beautiful. Recommend.translated by Google TranslatorView Detail
Very Good
Note that it is not a common Bar end cap.I bought it to fill a hole in the bar end, but I was under the impression that the actual product was smaller and exclusive.
I think there are probably many people who would do the same thing, so you should check the Size carefully before you buy.View Detail
Excellent
MOTARD, I know you're persistent about Motocross, but it's a zeta?This time I'm going to make sure I get a good in-person picture of it installed?
In my last post, I told you how good these Items are only in writing, but a picture is worth a thousand words?
Take a look at the images, this feeling of unity with the Grip without any discomfort and the cool appearance of the Slider.
The Potential that has the concealed potentiality exudes like SNIPER of great skill. zetaBrand is great.View Detail
Excellent
Same size as the Grip diameter.I'm using it on a 2007 wr250x, MOTARD, ZETA for Motocross.
The thickness of the slider is about 3cm, so the slider does not stand out even if you wear it, and the matte black color with the Manufacturer logo stands out very well.
We like the wr250x OEM steel Handlebar, and the good thing about the Slider is that it is available in two different materials (steel handle and aluminum handlebar) to fix either steel or aluminum handlebar.:It comes with an aluminum fixture. It is not likely to come off like the other Bar Ends when it is tipped over like the Rubber Bush. (The fixing method is the same.) I was using it heavily with Motocross and HardEnduro, but it did its job well, and it didn't come off when I fell over, and the Handlebar protected the Throttle tube and Grip even when the Handlebar bent, so I was able to survive on my own. I am a great believer in the zeta Bar EndSeries. It's probably the cheapest bar end slider on the market, but the performance is unmistakable.View Detail
Very Good
as expected (as opposed to expected)Since the ZETAHandlebar was installed in MT-03, I tried to make the Bar End also ZETA I did
It's the same Manufacturer, so the fitment is perfectly fine
Other Manufacturer's Tightening Rubber Spreads Type, Not Spreads I think there is little worry about it falling out because the part is aluminum
It is so light that it is useless as a weight, so be careful Note that I don't have any problems with the MT-03, especially with the vibration of the HandlebarView Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING