About quality and textureBrembo is very good brand and you get what you pay for. This is very well made. The texture of the reservoir is good, no sharp parts, fits good.About the feeling of useReplacement for original master cylinder and original reservoir. This feels a lot better and I have more control of how the brake works now.Products to buy togetherI did not buy with anything else as this is all I needed.Difficulty of installationNot difficult. 1 out of 10 so pretty straightforward and easy.Cost performance and comparison with other productsThe cost is good value, more expensive than some other brands but Brembo is better quality.About shipping and packagingShipping very good value and arrived quickly. Packaging was good, lots of padding, no damage.Any concerns, cautions, or advice when purchasingNo issue or concerns, I trust WebikeView Detail

I purchased this as I changed out my stock MT10 master cylinder witht he Brembo reservoir kit in clear. I did however want to try the smoke colour too, so I just purchased this tank. This was obviously an essential part for the upgraded master cylinder to work. The price was awesome, much cheaper than I have seen elsewhere. I already upgraded to the Brembo reservoir kit and wanted to change the colour tank. The shipping was very reasonable and as this was an additional item with others it worked out very good indeed. When this was delivered to me which took around a week, as always, the packaging was excellent, again, as always. No damage to anything within this order.The workmanship of the parts in this kit were flawless. I had already removed the old clear tank and it was a simple replacement for the smoke grey one. This does look a lot better than the clear one and just adds a bit more fun to the bike. Thanks again Webike, great serviceView Detail

I have always played around with my reservoirs and this was another option to try. From a well respected brand and very well made part. The 90 degree angle makes fitting the brake lines easy and hassle free. Easy to mount with a butterfly bracket. Very sturdy tank which comes with a bolt down cap and removeable diaphragm. By the way, you can still see the fluid level even though this is a moke colour.View Detail

I had always wanted to upgrade teh oem Yamaha rear reservoir for something a lottle different and wanted to keep with Brembo so this was a purchase I must make. I also wanted a smoke colour as I think they look better and do not cloud like some of the white/clear ones do. It was not hard to find the tanks on Webike as you just have to type in Brembo and search down. Easy really. Even though I was always going to put a tank cover over this, I would know that is was smoked and to my liking. The cost of this was really good and almost the same as a standard clear one anyway from Webike so why not. My order was delivered by Fedex as I do like how they operate. All was packaged really well from Webike which I do love. The tank came in a Brembo packet. This finish is a really good looking tank. There is no distortion to the look, the smoke colour is dark but not too dark not to see your fluid levels. Fits straight on and no problems. I did not even have to bleed the rear as I clamped the hose before removing the old one. I love itView Detail

This an upgrade I did a while ago but had not gotten around to doing a review on the Smoke reservoir kit.I have had a lot of experience with Bremo products and for this reason, I decided to purchase the Smok kit. It is a little easier on the eye and ou can see the fluid clearly as the view is not frosted.The price from Webike is exceptional, I had to wait a while before I could even order this kit as the Smoke was not in stock. Didn't take long for Webike to get the stock so I ordered whilst I could.The shipping method I used was EMS fast. They just do a great job in getting your order to you in record time, I believe this was a 4 day turnaround from Japan to the UK. You can't get much better than that.I ordered other parts with this and that also cut down on the shipping cost. Everything in my order was packed really well and although there was little space in the outer bax, Webike took the liberty to fill in any empty space with additional padding.This kit really is a goreous piece of work. The bracket is super clean, machined very well. There is literally everything you need to fit this kit to your bike as long as you have space to put one. I did have to get a new brake line made up but that was purely down to me not liking the bend on the line when this was fitted. It didn't really need changing but my OCD meant it just didn't suit me.This comes with all the clips, bolts, washers and the anti vibration rubber. It does look wicked once fitted. Works really well and teh brake feels a bit crisper although that might also have a lot to do with the fact I changed out the master cylinder at the same time.Anyway, I am very pleased with the result. Thank you Webike for the great effort you put into each order, keep it upView Detail

One of my springs for the Akrapovic exhaust took a little damage due to a rock in the road. There was no saving that one so I decided to buy a few spares for it. I found the right length by checking Webike site and found the correct ones to replace. The price from Webike was really good value and as I was already ordering other parts, the shipping cost was a lot less that anticipated. I use EMS as they just get my orders to me fast. In 5 days from shipping, the springs arrived. They were well packaged by Webike and were inside a bubble wrap envelope too. The springs measured exactly what I needed for the replacement. The quality is superb and look such a good set of springs. The rubber sleeves are well made and the logo is loud and proud on them. The actual spring is a tough one and takes a bit of force to get it attached to the mount points. This is good in my opinion as you do not want them popping off during a ride out. All in all, I am very happy with this purchase, thank you Webike for taking the care with my order. View Detail

As with a lot of these older bikes, at some point you just want to spruce them up a bit. This is where we are at with this YZF-R1 2010 model. The crankcase covers were not too great and getting them replaced and not just repainting was a far cheaper alternative. I found the right part number by checking Yamaha schematics and then inputting that on Webike website. The price Webike had this for was fantastic value for money and better than I could source locally. After adding to my basket, the other parts I needed to order for this bike were all shipped together. This saved on shipping costs and I know that all the parts I need for this job would arrive tat the same time. After only 5 days my order arrived in the UK. The parts were all professionally packaged and there was no signs of damage to the box or contents. This crankcase cover was inside a sturdy Yamaha box. The finish on the cover was a lovely satin black which seems to be the norm for most Yamaha covers. The workmanship on this crankcase cover is excellent but you would not expect anything other than that from Yamaha. A great Japanese company. The alignment was spot on and after adding the gasket for this, the job was complete. One happy customer. Thanks Webike.View Detail

This thing of beauty came in with a lever holder issue where it had eventually given up the ghost and snapped at the wire input slot. Not really an issue as you can still buy the replacements and are OEM. Finding the right one was a little tricky but eventually I got there. Webike did stock these which was great news and the price was ridiculously cheap. Along with some other parts in my order, I got them all shipped using EMS, which is now my preferred courier. They just get the job done fast. 5 days after being shipped my order arrived. All the parts were free from any damage and were in perfect order. This lever holder is nothing too special but it also holds the clutch cable and so needed to be right. It has a nice satin black painted finish, all the threaded holes are well machined and it went onto the bars really easily. The time consuming part is removing all the switch gear to get this put on. Massive difference now it looks like the bike is 10 years younger. Very happy with this small purchase, thanks Webike. View Detail

At the time of inspecting this bike as it was due for the MOT, I found that not only was the belt toast but the disc brake was also in need of attention. Upon closer inspection, I found after precisely measuring the tolerances that the disc was beyond it's life. No problem, I can order one from Webike. Finding the right one for this model and year was easy enough using the schematics section on Yamaha website. The part did however fit the other smaller version too so readily available. The price Webike had this for on sale was great and far better than I could source locally from the dealer. Along with some other small parts I had them all shipped using EMS. In 5b days my order arrived. Perfect condition with no problems at all. The disc was well packaged inside the Yamaha box and protected with bubble wrap that I assume Webike applied. The disc itself is a stunning piece of machining. The tolerances after checking are 100% spot on to what they should be from new. The disc face is super well machined and there was no swarf or dust from this process inside the box. Very happy customer right here. Fitted in no time and on the road by the end of the day. View Detail

So, this bike was in for a small check over and the owner wanted to get a protector for the screen. These do eventually get scratched so if you can stop that from happening in the first place, it's a good idea. Finding that Kawasaki actually make a genuine one for this bike was truly surprising. Anyway, finding the right one for this bike was straight forward by using the schematics for this model and year. Although the price is a little higher than some after market ones you could buy, why risk that when Kawasaki have put the time and effort into making one specifically for this model. No doubt, it will also be more hard wearing than after market ones too. Along with a couple of other smaller parts I needed, I got them al shipped using my preferred courier, EMS. They just get the orders delivered fast and with no hassle. In 5 days, my order arrived. The screen protector arrived in the Kawasaki packaging and was also kept nice and flat by Webike warehouse by adding a piece of cardboard. Very nice. The screen protector was very god quality and not as flimsy as I imagined it to be. It is a pretty tough addition. Easy to fit and does have a very slight tint to it. Very pleased with this and will be looking for genuine screen protectors in the future, especially if that happens to be a Kawasaki branded bike. Thanks Webike. View Detail