One other area of this bike that needed attention was the electronics. As this bike had been incorrectly stored, a multitude of critters had eaten away at various parts. Including these were some parts of the harness. Although I could probably repair the harness, I would still need to find a really good user manual to make sure all the connections were where they were supposed to go. An easier solution was just buy a new Honda harness. I was however expecting this to be a pretty expensive part. To my astonishment, the entire harness was super great value. I did have a lot bigger budget for this but now, I can use the extra funds for other parts of the bike. With other parts for this rebuild already in my cart, I had them all shipped using EMS. The order arrived in perfect condition and no damage during transit. This took just 5 days from being shipped which you cannot argue about, that is super speedy delivery. The harness was expertly packaged and inside a nicely made extra padded box. All the connectors are superb quality and not one loose wire or connector was found. There were no splits or flaws within the harness. A quick multimeter check showed everything was as it should be. The old harness had already been removed due to the bike needing to be professionally cleaned prior to fitting the new parts. This is really not a big harness and it pretty straight forward to fit. I did order the genuine Honda clips to mount the harness where needed so it fitted well. After a short test, all was as it should be. Now onto the next area of the rebuild. Great work. View Detail

Exactly what I ordered, genuine Honda part for my 2005 CBR1000RR , very fast delivery and accuracy of the product...Shipping time was exactly as described too.Prices are best you can get but bear in mind, if you leave in Europe you will have to pay little tax amount which is acceptable.I already ordered more parts today so I am a happy customer!Thank you for the great service, my regards from Cyprus.View Detail

Great part, original Honda, top quality. It has high resistance and an excellent finish. Plus, it fits my motorcycle perfectly.View Detail

I had an issue with the ignition barrel and snapped the key in the process. After a lot of pushing and pulling the key decided to snap, my bad. So I did not have to go and buy a totally new set of locks, I had an old set hanging around and decided I would get the lock set cut with a new key, this is where the new blank key comes in.I could have just got some random generic key but as this is an essential part that needs to work every time,I went for the genuine Honda one. The part number was not particualrly hard to find and Webike had these available. Win, win. The price was very reasonable and better than could have sourced locally. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. All my parts were received in perfect condition. The key even came in a small Honda bag which was a nice touch. The key has a really good and solid feel to it. Although it is a blank, the edges are smoooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View Detail

Bought this bolt set for my bike. I use them on restoration projects.Great price, Great quality product clean and well organized very helpful to have around.They are coated, semi-shiny, and don't oxidize.Webike too fast.The packaging is very good. It comes in a big box.Is it really necessary? The shipping fee is a bit highView Detail

One of the final parts needed which we did not have was this damper for the right side under panel. For some reason this was also missing from the box so I decided to just order a new one instead of trying to hunt down a second hand one. Basically, finding the right damper was easy by checking the Yamaha schematic for the cowling section. Then from there, just put the part number into Webike search and voila, the right part number and a cracking price to boot. So much cheaper than my local Yamaha dealer could match. Along with a couple of other parts for this project, I had them all shipped to save on funds. Also, EMS are the best courier I have found using Webike for over a year now. They just deliver fast and on time. I know when my order will arrive as the tracking is accurate. Webike warehouse packaged my items very well and there was no damage to anything when I received them. The damper is mostly for heat resistance but also does have some padding to help stop vibrations. Although, you could probably not fit this, why would you leave it off at this price. You then know there is nothing going to vibrate and the heat protection is obvious.I cannot commend enough how well Yamaha make their spare/replacement parts. Just fantastic. One very happy customer right here. Thanks Webike, you are the best!!View Detail

After refitting the new clutch plates on this YZF-R1, I found that at some point this had already been done and whoever did it, damaged the lock nut for the entire clutch basket. This is not a good thing as this nut needs a lot of torque and sooner or later, this is not going to work. New one ordered. Finding the right one was easy by using the Yamaha schematics and then searching Webike. As this is a popular model anyway, Webike already had this lock nut in stock. The price was a lot better than I could source locally and the local dealer did not have this one in stock for some reason. No matter, Webike is the place to go. In 5 days, EMS had my order delivered and all the smaller parts inside the order were well packaged and secure. This lock nut came in the standard Yamaha packaging. It is very nicely machined. The quality is excellent as you can see from the inner thread state. Smooth as butter and no extra shards of swarf to remove like some other companies leave. Fitting is easy enough but make sure you check your owners manual for the correct torque setting. Now this is fitted, I know that if the clutch needs to come off at any point in the future, the nut will come off with proper care. Very pleased with this purchase, life saver. Thanks Webike View Detail

This bike came in for a bit of a service and new oil change including filter for this MT07. The filter was easy to find, it also fits a few different models so is readily available. The price was really good, and still better than could source locally for the same Yamaha part. As I always have more than one part in each order, the cost of shipping is really good. I generally use EMS Fast service as it gets to me very quickly and the tracking is full, I mean full as in every step of the journey. I know exactly when the order will be delivered, the delivery has always been on time. Every part in the order was well packaged as expected and the outer box was sealed on all sides so none of my smaller parts could escape. There is not really much to say about the finish of this oil filter as there is not really much you can see, the paint is clean and the threaded part is super smooth. The seal is intact and no tears, rips of dinks. Nothing is bad with Yamaha oil filters at all. Never had any problems. The paint on the outer is really good and no runs or blemishes on it at all. The filter threaded on really easily and obviously, with any oil filter change, a small amount of oil on the end just to help seal. Fitted in no time at all and filled the oil in the engine. Runs really well and with the new oil, sounds a lot better than it did. Happy customer. Thank you Webike for all your help with the order contents. View Detail

When you ever change anything on the crankshaft, then this is a part you really do need to purchase. It is not advisable to re-use a crankshaft lock washer as they can easily fail and they are really only a one hit wonder. Sometimes depending on where the lock washer is, you can just bend over one tang, hen you can re-use it for a second time with zero issues by bending the second tab. As this is for the crankshaft and not just a sprocket, I always buy as and when needed.I always have more than one item in my order as this saves on shipping, the same in this case. All were sent via EMS which arrived 5 days after shipping. The order was well packaged and all the items inside arrived in perfect condition. These Yamaha lock washers come in the Yamaha standard packaging and were also inside a bubble wrap envelope for safety. The construction is sturdy but does have a degree of give due to the action needed when bending over the tabs. The alignment with the spline on the shaft is perfect with barely any movement. Vey pleased with this purchase. Great work by Webike in getting my order safely to me and the front sprocket is now very secure. View Detail

I was needing to fix a few problems on this YZF600 which came in. One of the main issues was the front stop switch was clearly faulty as the brake light was not functioning at all. The best way to fix this was simple and replace with a new genuine Yamaha part. Locating the right part was easy by using the Yamaha schematics and cross referencing with Webike to make sure the stock was available. This time, the re was a slight wait time but that was fine. The price from Webike was far better than could be sourced locally and the timescale for the part was better too from Webike. I did have other items in ,y order and all were shipped together. The package arrived in the UK in 7 days as there also was a weekend in between. All my parts in the order were well packaged and there was lots of padding to make sure that any of them got damaged. The stop switch came in a small Yamaha packet as standard. The part itself looks great quality but the true test was when it was installed. Any faults would be easily spotted. I had no hesitation and the stop switch worked as soon as it was plugged in and screwed onto the master cylinder. Very please with this purchase and it fixed what I needed. Thanks Webike View Detail