¿Compatible con el diámetro del puerto de entrada Φ24?
Chorro principal #150 Chorro piloto #15 preensamblado
[Contenido del kit]
Mikuni VM Φ26 carburador ASSYX1
Juego de colectores X1
Llave inglesa de 5 mm en forma de L
Perno de la tapa 6X15X2
Perno de la tapa 6X20X2
Cuerpo del colector X1
Embalaje del colector X1
Banda de acero inoxidable (Φ32-50) X 1
Soporte de goma (VMΦ26) x1
Chorro principal (Mikuni Hexágono/Grande)
NOTA: Es posible que necesite ajustar los jets para que se adapten a las especificaciones de su motor y a las condiciones de conducción. El kit de carburador Kitakos Bic utiliza carburadores genuinos del fabricante, así que por favor asegúrese de usar ajustes genuinos. Si utiliza un carburador distinto del genuino, no podrá obtener el ajuste correcto y puede causar problemas.
*No se puede utilizar un limpiador de aire normal.
*El juego de espaciadores de bobina IG incluido es para usar con el mono de 12v.
*Algunos silenciadores tipo up no pueden ser usados en este modelo.
○Intake port diameter Φ24 compatible
○Main jet #150 Pilot jet #15 Assembled
[Kit Contents]
Mikuni VM Φ26 carburetor assembly x 1
Manifold Set x 1
5mm L Wrench
Cap Bolt 6 x 15 x 2
Cap Bolt 6 x 20 x 2
Manifold Body x 1
Manifold Packing x 1
Stainless Steel Band (Φ32?50) x 1
Rubber holder (VMΦ26)×1
Main Jet (Mikuni hexagonal/large) #
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.
*The included IG coil spacer set is used when installing on a 12V monkey.
*Since it is right side, some high-mount exhausts cannot be installed