Protector de policarbonato de serie..
Elegante guardamanos con protector de policarbonato (PC) montado en el extremo de la barra de serie..
Policarbonato (PC) para la resistencia a los impactos, a los rayos UV y a las altas temperaturas, y un diseño versátil, sencillo y elegante que puede utilizarse en cualquier estilo de vehículo..
No sólo aumenta la protección contra el viento, sino que también tiene la función de reducir el impacto frontal..
La instalación es tan sencilla como la fijación en el extremo del manillar..
El guardamanos se fija firmemente en su lugar con un tapón de extremo de barra de aleación de aluminio de alta resistencia mecanizado, sin la complejidad de un guardamanos convencional..
El protector se puede quitar y colocar otros protectores ZETA de diferentes diseños, lo que le permite disfrutar de su estilo preferido..
Aflojando los pernos del brazo, el ángulo puede ajustarse sin escalonamientos hacia arriba y hacia abajo alrededor de los extremos de la barra..
El espaciador especial permite ajustar la posición desde la posición central en 5° en un paso, 4° hacia arriba y 4° hacia abajo, para un total de 9 posiciones..
Se adapta fácilmente a su estilo preferido..
■Se pueden ajustar dos posiciones de los brazos para adaptarlos al vehículo mediante ranuras en los tapones de los extremos de la barra..
Evita que el cuerpo se caiga y también actúa como tope para evitar daños en el tubo del acelerador en caso de caída..
■ Protectores de nudillos de resina de PU suave y flexible..
Reduce el impacto de la parte delantera y evita que se dañe el cuerpo del protector..
Existen dos opciones de diseño al colocar y retirar la placa frontal impresa con láser..
■Protector de policarbonato extraíble de serie..
Puede equiparse con la serie ZETA XC Protector.. Amplia gama de opciones de estilo.
[Protector acoplable].
Protector ZETA X3.
Protector ZETA X2.
ZETA XC Protector.
Protector ZETA XC-PRO.
[Cómo elegir un guardamanos sónico].
Tipo universal ZS72-2000/ZE72-2100
Puede instalarse en vehículos en los que los tapones de los extremos de la barra se han retirado y ahuecado..
●HONDA vehículos
Si la pieza de montaje tiene una pesa interior escalonada en forma de media luna, se puede retirar la pesa interior y hacer la pieza hueca para el montaje..
Vehículos ●SUZUKI
Los contrapesos internos pueden ser retirados si están presentes y colocados si están huecos..
M16/M8 tipo ZS72-2001/ZS72-2101
Retire los tapones de los extremos de la barra y compruebe los extremos del manillar.
Vehículos ●YAMAHA
Se puede montar en manillares con extremos mecanizados de paso M16 de 1,5 mm.
Vehículos KAWASAKI
Se puede montar en el manillar con tuercas M8 soldadas a los extremos del manillar.
Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.