Diámetro de la perforación]57mm
Cantidad de carrera]54mm
[Diámetro de la válvula de admisión: 22 mm x 2
[Diámetro de la válvula de escape]19mmX2
*Con la culata del Desmodromic 4V de doble leva, el motor será más largo y las horquillas delanteras de serie, el puente superior de serie y el vástago interferirán con los neumáticos, por lo que tendrá que cambiar la parte delantera.
*El caso del gorila mono
Le recomendamos que use los diferentes kits de horquilla delantera de SP Takekawa al mismo tiempo.
Cuando se instala el SCUT138cc en un coche equipado con un kit de horquilla delantera vertical de 30 mm de diámetro, es necesario cambiar al juego de dirección y puente superior especificado (número de pieza: 06-02-0015). Tipo de desplazamiento de 60 mm
El kit de horquilla delantera de 2 piezas de SP Takegawa (para 10 pulgadas) no se puede utilizar con la Desmodromic Twin Cam 4V SCUT138cc porque la aleta interfiere con la culata.
*En el caso de CRF50F/XR50R y CRF70F/XR70R
SP Takegawa no vende kits de horquillas delanteras.
Existen en el mercado algunos kits de bastidor y horquilla delantera externos, pero SP Mukawa no ha confirmado la instalación de estos kits. Por favor, instale bajo su propio riesgo.
El silenciador digcrosser de SP Takegawa no se puede instalar al mismo tiempo.
*Dependiendo del lote, es posible que reciba el producto con el antiguo precio y la etiqueta con el antiguo código JAN antes del cambio de precio. Tenga en cuenta esto.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
[Bore Diameter] 57mm
[Stroke amount] 54mm
[Intake valve diameter] 22mm x 2
[Exhaust valve diameter] 19mm x 2
*When the twin cam Desmodromic 4V cylinder head is installed, the length of the engine becomes longer and the engine interferes with the tire with the stock front fork and the stock top bridge and stem, so the front end needs to be changed.
*For Monkey and Gorilla
・It is recommended to install SP Takegawa's front fork kit at the same time.
・When installing SCUT138cc on a vehicle equipped with Φ30 upright front fork kit, use the specified steering & top bridge set (part number: SCUT138cc)06-02-0015).60mm offset type
・SP Takegawa 2 piece front fork kit (for 10 inches) cannot be installed with Desmodromic Twin Cam 4V SCUT138cc because the fender interferes with the head.
*For CRF50F / XR50R and CRF70F / XR70R
・SP Takegawa does not sell front fork kits.
・There are some aftermarket frame and front fork kits on the market, but SP Takegawa has not confirmed the installation of these kits.You are responsible for your own vehicle installation.
・SP Takegawa's digcrosser exhaust cannot be installed at the same time.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.