[Tipo] Filtro de potencia
[Especulación. ]
Diámetro:Φ36
・Base body:TMR36-D9
・Carburetor pitch:77-93-77
Diámetro exterior de la espiga (mm) : 42 mm
Longitud de espiga (mm) : 48 mm
Se puede utilizar el soporte del acelerador de ETS.
[Piezas requeridas por separado]
SET DE TANQUE DE CAPTURA DE ACEITE UNIVERSAL (Número de parte) :535-000-x000)
· Banda aislante (40-60)
Junta del carburador para el enfriamiento del aire del GPZ1100F (Producto KAWASAKIOEM)
*Se requiere cualquiera de los siguientes juegos de porta-aceleradores como una parte separada para su instalación.
Juego de portafresas YOSHIMURA Racing para cuerpo grande TMR (L = 850 mm)
Requerirá uno de los siguientes juegos de porta-aceleradores
*Piezas necesarias: Kit de tanque de respiración de aceite Yoshimura.
*Las piezas necesarias son las que Yoshimura Japón confirmó la instalación durante el desarrollo.
*Si las piezas genuinas del fabricante han sido descontinuadas, por favor prepare las piezas apropiadas.
* La longitud del cable del acelerador es para una operación estándar.
*El adaptador del filtro incluido en este producto es de aluminio mecanizado.
* Tenga en cuenta que las especificaciones del producto pueden cambiar debido a razones del fabricante.
[Type] Power filter
[Specification]
・Inner diameter: Φ36
Base body:TMR36-D9
Carburetor pitch:77-93-77
Spigot outer diameter (mm):42mm
・Spigot total length(mm):48mm
・Stock throttle holder can be used
[Parts required separately]
Universal oil catch tank set (Part number:535-000-x000)
・Insulator Band (40-60)
・GPz1100f air cooled intake manifold (KAWASAKI stock)
*Either of the following throttle holder sets is required as a separate part for installation.
*Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
*Parts required separately:YOSHIMIURA Oil Breather Tank Kit.
*Required parts are the parts that YOSHIMIURA Japan confirmed the installation during the development.
*Please prepare the appropriate parts if stock parts have been discontinued.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The filter adapter included with this product is a machined aluminum product.
*There may be changes in product specifications due to the manufacturer's reasons.