Material/Material] Aluminio
[Posición](Comparado con las acciones, el tamaño en el extremo de la barra)
Ángulo de apertura : 12 grados/ancho : 795mm/frontal : 12 mm.
Ángulo de apertura : 14 grados/ancho : 790mm/frontal : 15 mm.
Ángulo de apertura : 16 grados/ancho : 780mm/frontal : 19mm.
[Especificaciones]
Diseño completamente dedicado
Compatible con los protectores de manos genuinos.
El agujero de posicionamiento de la caja de interruptores ya está perforado.
No es necesario cambiar los cables y las mangueras.
Accesorios] Espaciadores (Estándar) : 2mm)
*La imagen es de un 1200DVT.
*La imagen contiene otros colores y productos.
*El parabrisas está equipado con el parabrisas estándar (stock #48710822A). Por favor, compruebe con su distribuidor de antemano.
*El enduro no está certificado para su uso con el enduro.
*El deslizador del extremo del manillar de AELLA tiene un protector de nudillos y no puede ser instalado.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Tenga en cuenta que las especificaciones pueden ser modificadas por el fabricante.*Sobre el aluminio anodizado
Básicamente, cualquier color de aluminio anodizado se desvanecerá por el calor y los rayos ultravioleta. Especialmente, las partes directamente conectadas con el motor tienden a desvanecerse rápidamente debido al alto calor. El color negro tiene una capa más gruesa que otros colores, pero los colores rojo y azul tienden a desvanecerse más rápido que otros colores. Tenga en cuenta que los colores tienden a desvanecerse más rápido que otros colores.
Incluso el mismo material de aluminio puede ser teñido de forma diferente dependiendo del material utilizado para anodizar. Dependiendo de la combinación de materiales, puede haber una diferencia en el tono de color.
[Material] Aluminum
[Position] (stock comparison, dimensions at the bar end)
・Aperture angle: 12 degrees / width: 795mm / front: 12mm
・Aperture angle: 14 degrees / width: 790mm / front: 15mm
・Aperture angle: 16 degrees / width: 780mm / front: 19mm
[Specification]
・Fully dedicated design
・Compatible with stock handguard
・Pre-drilled positioning holes for the switch box
・No need to replace cables and hoses
[Components] Spacer (Standard: 2mm)
*The image is of 1200DVT.
*The image includes other colorings and products.
*This product is for use with the standard windshield (stock part number: 48710822A) for fitting.There is a possibility that the windshield and the mirror may interfere with each other when the handlebar is turned with the products of DUCATI Performance and other manufacturers.Please check with your dealer before installation.
*Not confirmed to be compatible with Enduro.
*AELLA handlebar end slider cannot be installed due to the knuckle guard.
*There may be changes in product specifications due to the manufacturer's reasons.*About the anodized aluminum feature
Basically, any color of anodized aluminum will fade due to heat and UV light.Particularly, parts directly connected to the engine tend to fade quickly due to high heat.Black is less likely to fade than other colors due to its thick film, but red and blue tend to fade faster than other colors due to the chemicals approved in Japan.
Depending on the material to be anodized, the coloration of the same aluminum may differ.There may be a difference in color depending on the combination.