cuello : negro
El diámetro del agujero : 56mm
relación de compresión : 11.2 : 1
golpe : 57.9mm (Normal)
Diámetro de la perforación del cuerpo del acelerador : Φ34
remedio : Pistones de fundición utilizados
[Establecer el contenido]
e-Stage Bore Up Kit
FIcon TIPO-e (Controlador de Inyección)
Árboles de levas deportivos (N-15) Especificaciones de descompresión
Kit de cuerpo de acelerador grande (tubo de conexión incluido)
*Las piezas de descompresión de fábrica no se pueden acoplar al N-15.
*En cuanto a la instalación del e-Stage Bore Up Kit
Instalando el SP Takekawa eStage Bore Up Kit, la potencia del motor y el par motor se incrementarán enormemente, lo que aumentará la carga del cigüeñal.
Se recomienda utilizar el adaptador de soporte del cigüeñal al mismo tiempo para reducir la carga sobre el cigüeñal.
Los adaptadores de soporte del cigüeñal están diseñados para añadir un soporte de rodamiento de bolas al extremo del volante del cigüeñal para reducir las torceduras y las deformaciones y aumentar la durabilidad del cigüeñal.
Adaptador de soporte del cigüeñal para GROM(JC61-1000001-)/MSX125:01-10-0134
Adaptador de soporte del cigüeñal para GROM(JC61-1300001-/JC75-1000001-)/MSX125SF:01-10-0138
*Cuando se utiliza el FI-CON TYPE-e, se requiere un PC o un Smartphone. Si no tienes estos requisitos, no puedes usar FI-CON TYPE-e. Además, es necesario estar conectado a Internet para descargar el software y el software de aplicación. Debes estar conectado a Internet para descargar el software y el programa de aplicación. Por favor, entienda que hay un cargo por el software de aplicación.
*Tenga en cuenta que las especificaciones del producto pueden estar sujetas a cambios debido a la conveniencia del fabricante. Por favor, entiéndelo.
Color: Black
Bore Diameter: 56mm
Compression ratio: 11.2: 1
Stroke: 57.9mm (Stock)
Big Throttle Body Bore Dia: Φ34
Specifications: Cast pistons
[Set components]
・E-Stage Big Bore Kit
・FI Controller TYPE-e (Injection Controller)
・Sports Camshaft (N-15) Decompressor
・Big throttle body kit (connecting tube included)
*N-15 is not compatible with stock decomp parts.
*Concerning the installation of the e stage big bore kit.
The installation of SP Takegawa's e-stage big bore kit will increase the engine output and torque significantly, which in turn increases the load on the crankshaft in terms of torsion and deflection.
SP Takegawa recommends to install the crankshaft support adapter at the same time in order to reduce the load on the crankshaft.
The Crankshaft Support Adaptor adds ball bearing support to the end of the flywheel side of the crankshaft to reduce twisting and deflection and to increase the durability of the crankshaft.
・Crankshaft Support Adapter for GROM (JC61-1000001-) / MSX125: 01-10-0134
・Crankshaft support adapter for GROM (JC61-1300001- / JC75-1000001-) / MSX125SF: 01-10-0138
*When using FI-CON TYPE-e, a computer or smartphone that meets the requirements is required.If you do not meet the requirements, you will not be able to use this product.You will also need to be connected to the Internet to download software and applications.In the case of an application, a fee is charged.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.