[Número de pieza del fabricante] 907-936-437-000
Material ignífugo utilizado
sin ninguna costura en el sol
[Fuente]
Ignífugo (plata) : Hilo Teijin Tetoron de 250 denier / Tela de lana con resina especial de uretano de alto grado de aluminio retardante de la llama / Capa dura de flúor con tratamiento hidrófugo y antiestático / 100% poliéster / Material aprobado por la Asociación Japonesa de Protección contra el Fuego
A prueba de fuego (Azul) : Tejido Ripstop con resina especial de uretano de alto grado retardante de la llama / tratamiento hidrófugo de capa W dura de flúor / 100% poliéster / material certificado por la Asociación Japonesa de Retardantes del Fuego
Refuerzo (Negro-Naranja) : Recubrimiento de PVC con tela reforzada
*Algunas opciones pueden no ser compatibles con este producto.
*El motor y el silenciador se calientan justo después de funcionar. Ya que el silenciador puede salirse de la cubierta de la bicicleta, por favor úselo después de que se haya enfriado lo suficiente.
*La tela es impermeable y el hilo de coser es repelente al agua, pero no es completamente impermeable.
*El parabrisas de cloruro de vinilo puede estar térmicamente deformado. No use el parabrisas a alta temperatura.
*El viento puede entrar en la cubierta de la bicicleta en el momento de viento fuerte. El viento puede entrar en la cubierta de la bicicleta con vientos fuertes.
*Dependiendo de la forma del vehículo, puede que no sea posible alcanzar la superficie del suelo del neumático.
*Ten cuidado de no quemarte por el calor de la fricción cuando tires de la cuerda.
*La arena y el polvo del revestimiento pueden causar arañazos en la carrocería del coche.
*Algunas opciones pueden no ser compatibles con este producto.
*El mango está girado hacia la izquierda.
[Manufacturer's Part Number] 907-936-437-000
Use of flameproof materials
No top seam
[Material]
・Flameproof raised fabric (silver)Teijin Tetoron 250 denier yarn / Raised thick plain weave fabric with special high-grade urethane resin aluminum fire retardant / Fluorine-based hard W coat water repellent finish and antistatic treatment / 100% polyester / Japan Fire Retardant Association certified material
・Flameproof (blue)Ripstop fabric with special high-grade urethane resin fire retardant / Fluorine-based hard W-coat water-repellent treatment / 100% polyester / Japan Fire Retardant Association certified material
・Reinforcement (black / orange): PVC coated with reinforced fabric
*This product may not be compatible with some installation options.
*The engine and exhaust are hot immediately after driving.Please use it after it cools down sufficiently because the motorcycle cover may melt.
*The fabric is waterproof and the sewing thread is water-repellent, but it is not completely waterproof, so the vehicle body may get wet depending on the amount of rain.
*Vinyl chloride windshield may be thermally deformed.Do not use this product in high temperature.
*In high winds, the wind may penetrate into the bike cover.Take sufficient care of the equipment, including the prevention of this product from falling over.
*It may not cover the ground surface of the tire depending on the shape of the vehicle.
*When pulling the cord, be careful not to burn yourself due to frictional heat.
*Since sand, dust adhering to the lining may scratch the bike body, please inspect and care for the lining frequently.
*This product may not be compatible with some installation options.
*This product is designed to be put on by turning the handle to the left.