Esto es "Step Up Kun" que eleva la posición del escalón 30mm hacia atrás y hacia arriba desde la fábrica..
Para instalar la máquina de escalar, hay que quitar el escalón estándar e instalar el Step-Agaru-kun..
Instalando el Step-Up Kun, puedes reducir enormemente la interferencia entre el suelo y el escalón al tomar una curva..
La posición del escalón puede lograrse sin ninguna interferencia incómoda del escalón y sin comprometer la posición de la acción..
Diseñamos para usar los genuinos escalones de goma para reducir la carga en los pies..
La rigidez se asegura usando A2017 como material..
La superficie está químicamente pulida con aluminio anodizado negro para lograr un buen equilibrio de color cuando se instala..
This is the "Step Agaru-kun" which raises the step position 30mm backward and 30mm upward from stock.
To install, remove the stock step, install the Step Agaru-kun, and then install the step.
By installing the Step Agaru-kun, the interference between the step and the ground when cornering can be greatly reduced.
It eliminates the uncomfortable feeling of interference with the step, and realizes a spacious position because the step position does not significantly affect the stock position.
By using the stock rubber step, it is designed to reduce the burden to the foot.
The material used is A2017 to ensure the rigidity.
The surface treatment is black anodized aluminum with chemical polishing to ensure the best color balance when installed.