Ideal para usar en las mesas de camping KEMEKO CTM1 y CTMA1 y para usar el "BBQ Grill Hiratchi" en el CTMA1.
Por supuesto, el material tiene un excelente efecto de protección térmica y puede ser redondeado para crear un parabrisas y otros usos múltiples..
Puedes añadir un panel de extensión opcional más tarde para cambiar su tamaño según te parezca..
Ahora puedes usar KEMEKO "Hiratchi" en tu mesa de casa o de camping con confianza con la placa térmica KEMEKO..
Hiratchi fue diseñado originalmente para que la parte inferior del cuerpo no se viera afectada por el calor en el caso de un incendio de carbón, pero desarrollamos este nuevo diseño basándonos en las opiniones de aquellos que están preocupados por el carbón que cae por ambos extremos..
Dos finas placas de aluminio se laminan en forma corrugada (chapa ondulada) para ampliar la superficie y utilizar la capacidad de reflexión térmica y de disipación de calor del aluminio..
"Está etiquetada para pisos, pero puedes desviarla si es del tamaño adecuado..
El cuerpo se divide en dos placas y se utiliza como una placa con gancho de sujeción.
También se puede utilizar como un gran parabrisas doblándolo ligeramente como se muestra en la imagen.. Es menos propenso a colapsar con el viento que la mayoría de los parabrisas plegables y tiene una mayor altura para un mejor rendimiento..
No hay problema para el uso en casa o para cargarlo en un coche, pero cuando se está de gira en un campamento, es muy compacto (220x380x7mm, 300g) y cabe en el espacio de la bolsa cuando se desmonta y se almacena..
(Por cierto, un parabrisas típico tiene 650 mm de ancho x 240 mm de alto). (Los productos KEMEKO se manejan por separado)
Con un ancho de 650mm, puede o no ser necesario, dependiendo de la ubicación, pero el rendimiento es excelente dependiendo de cómo se use..
¡Este es un artículo imprescindible para el autocamping y las barbacoas de balcón!.
Ejemplo de uso
Placa de escudo térmico en la parte superior de la mesa auxiliar
"Evita que la mesa se queme por los residuos de carbón que pueden dañar ligeramente los lados de la parrilla de la barbacoa Hiratchi..
Cómo poner a Hiracchi en la mesa
Poner en la rendija como se muestra en la foto..
Un soporte en la hendidura ayuda a estabilizar la placa sin interferir con su forma..
Superficie superior Protección de la mesa
Dependiendo de la calidad y cantidad del carbón, puede explotar..
Además de proteger los tableros de la mesa, puede que quieras protegerlos por si acaso no se queman con el maldito carbón..
La parrilla debe ser arrojada sobre el fuego en el suelo antes de colocarla sobre la mesa..
Curado del césped
Básicamente, si tienes la estructura y la altura de Hirachi, no quemarás la hierba en una barbacoa normal, pero si la usas como un puesto de fuego, necesitas usar una placa inferior debido al alto aumento de la temperatura..
Aunque la diferencia entre usar productos distintos a KEMEKO Hiratchi, aún puede usarlos cuando se ensamblan dentro del rango de 400 x 380 mm..
It is also ideal for using the BBQ Grill on the KEMEKO Camping Table CTM1 or CTMA1.
Of course, it is also an excellent insulating material, and it can be molded into a round shape, making it suitable for various uses such as windshields and other multi-purpose applications.
You can also resize it by adding optional extension panels later on.
The KEMEKO thermal barrier underplate allows you to use the KEMEKO BBQ Grill safely on your home or camping table.
The KEMEKO BBQ Grill was originally designed to have a structure that is not significantly affected by heat, similar to charcoal fires, at the lower part of the main body. However, based on feedback from those who were concerned about the slight falling of charcoal from both ends, we have developed a new version.
Two thin aluminum plates are laminated in a corrugate-like structure to increase the surface area, reflect heat, and make the most of the inherent heat dissipation performance of aluminum.
It says it's for the KEMEKO BBQ Grill, but if the size fits it can be used for other purposes.
The main body is divided into two plates, which can be used as a single plate with a hook and loop closure.
It can also be used as a large windshield by bending it lightly as shown in the image.It is less likely to fall down in the wind than ordinary folding windshields, and it is taller, so it is superior in performance.
There is no particular problem when using it at home or loading it in a car, but for loading it when camping or touring, it is compact at 220 x 380 x 7mm and 300g when disassembled and stored, so it can fit in the space of a bag.
In case you are wondering, a typical windshield is 650mm wide x 240mm high.(Items handled separately by KEMEKO)
This 650mm width may or may not be necessary depending on your location, but this product can give you a great performance depending on how you use it.
This is a must-have item for auto camping and balcony barbecues.
■Example of use
Thermal barrier plate installed on top of the assistance table
Prevents the table from burning in the case that charcoal shavings from either side of the BBQ Grill fall out.
■How to put up the BBQ Grill
Slightly raise the slit as shown in the image and insert the stand part.
By inserting the stand into the slit, it can be stabilized without interfering with the shape of the plate.
■Top surface Table protection
Depending on the quality and quantity of charcoal, sparks may fly.
You may want to protect the tabletop from being burned by charcoal that may pop out of the fire.
The grill should be placed on the table after the fire has been lit with it on the ground.
■Turf Care
With the structure and height of the BBQ Grill, there is no worry that grass will catch fire in a normal barbecue. However, if you use it as a fire stand, you need to use an under plate because of the high temperature rise.
Even if you use a product other than KEMEKO BBQ Grill, you can use it if it fits in the range of 400 x 380mm when assembled.