cuello : plata
Manejar los agujeros de montaje : 22.2
Agujeros de montaje del espejo : 10mm
*Si tu moto tiene el interruptor de la palanca de la luz en el momento de cambiar al soporte de la palanca de la luz, el cableado al soporte de la luz se desconectará del arnés principal junto con el cableado al soporte de la palanca de la luz, por lo que no podrás girar la celda incluso si sostienes la palanca del embrague y presionas el botón de la celda.
*Por lo tanto, por favor, conéctese directamente a los dos cables que vienen del arnés principal para girar la célula.
*Si los cables no están desconectados, puede que tengas que modificarlos.
*Si tu moto tiene mucho movimiento debido a un cable de embrague oxidado, debes reemplazar el cable por uno nuevo.
*Al instalar el cable del embrague, tienes que maximizar la cantidad de juego libre antes de instalarlo, de lo contrario el cable se volverá plano y no podrás instalarlo.
*Después de la instalación, por favor reajuste el juego de cables a normal.
*No es posible instalarlo en los coches Honda con la caja de interruptores del lado izquierdo integrada en el vehículo.
*Modelos desinstalables (CB750KO?K6/CB550F/CB500F/CB400F/CB350F/HAWK todos los modelos)
Color: Silver
Handlebar mounting holes: 22.2
Mirror mounting holes: 10mm
*When you replace the lever holder with a light clutch lever holder, if your bike has a stock lever switch, the wiring for the stock holder will also be disconnected from the main harness, so the starter will not work even if you hold the clutch lever and press the starter button.
*Therefore, if you connect the two wires from the main harness directly, the starter will turn.
*If the wiring is not disconnected, it is necessary to modify the wiring, so please have it installed at a motorcycle shop.
*Please note that if the clutch wire itself is rusted inside and the movement of the bike is heavy, it will not become lighter unless the wire is replaced with a new one.
*When installing the clutch wire, first make sure that the clutch wire has the maximum amount of space before installation, otherwise the wire will become flat and cannot be installed.
*Please adjust the space of the wire to normal condition after installation again.
*This product cannot be installed on Honda or other vehicles with an integrated left switch box.
*Uninstallable models (CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / All HAWK series models etc.)