[Cantidad]1
[Tamaño]
Diámetro del tornillo 10mm
Alcanza 19mm
Llave de enchufe de 16 mm.
Forma]Tipo de separación terminal
Compatible con NGK] CR8E, CR9E, CR10E, CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EK, CR9EK, CR10EK, CR8EIX, CR9EIX
*La imagen es sólo de referencia. Este producto se vende en unidades de uno.
*Sistema de ignición de los coches de tuneado - Posible
*Sistema de ignición normal - Posible
*Vehículo de ignición a transistor completo - sí
*Vehículos de ignición CDI - sí
*Vehículos de 4 tiempos - sí
*Vehículos de 2 tiempos - uso de pista solamente
*Tipo de resistencia (con resistencias)
*El tamaño de la llave de enchufe es de 16 mm, que se utiliza para el enchufe C y así sucesivamente.
*El terminal es del tipo separado, por lo que se puede utilizar cualquier forma de la tapa del enchufe. El terminal está ligeramente atornillado en la fábrica, así que por favor compruebe la estanqueidad del terminal antes de la instalación.
*Para otras adaptaciones, por favor, consulte la siguiente lista de enchufes NGK.
*Los tornillos de montaje de 14 mm de diámetro y 19 mm de longitud son todos intercambiables.
AR12ZS (NGK "C plug" size)
[Quantity] 1
[Size]
・Screw diameter 10mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EIX, CR9EIX, SIMR8A9
*Heat value correspondence is from No. 8 to No. 10.
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Images are for reference only.The product is sold by the unit of one bottle.
*Ignition system tuned bikes - available.
*Ignition system stock bikes - available but limited types.
*Fully transistor ignition bikes - available.
*CDI ignition bikes - available.
*4-stroke bikes - available.
*2-stroke bikes - track use only.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*For other compatibility, refer to the NGK plug list below.All the mounting threads with a diameter of 10mm and a length of 19mm have compatibility.
*The tightening torque is 0.9kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.