La forma de la válvula : HB3 (1 lámpara)
consumo de energía : 40W
[Tamaño]
Dimensiones del controlador del LED : Altura 53,5 mm, anchura 28,5 mm, grosor 16 mm
Las dimensiones del cinturón de disipación de calor de los LED : Longitud (de la raíz a la punta) aprox. 132mm, Espesor (3 piezas por lado) aprox. 5mm, Ancho 9mm
・A : 30mm,B : 51mm,C : 81mm
A : Dimensiones desde el asiento superior hasta el extremo de la válvula (dimensiones del cuerpo de la válvula)
B : Dimensiones desde la superficie superior del asiento hasta la parte superior de la bombilla (interferencia aproximada con la pantalla del faro u otras partes de la bombilla)
[Establecer el contenido]
Un kit
Manual de instrucciones
*Puede que no sea posible crear el eje óptico porque el foco del faro no se reproduce completamente.
*En cuanto al faro del proyector, es posible que no tenga la máxima intensidad de enfoque cuando se utiliza en la zona de la luz de carretera.
*Aunque el faro tenga un reflector de lente transparente, la intensidad de la luz del faro con forma especial y una pequeña área de reflector puede no cumplir con el estándar de la inspección de vehículos en algunos casos raros.
*Por favor, tenga en cuenta que aunque muchos de nuestros vehículos han sido probados y se ha comprobado que cumplen con los requisitos de la inspección de vehículos, no podemos garantizar que todos nuestros vehículos cumplan con los requisitos de la inspección de vehículos.
*Antes de hacer el pedido, compruebe la compatibilidad de las válvulas con el vehículo y asegúrese de que no interfieren entre sí.
*Por favor, asegúrese de que hay al menos A+15mm de espacio para su arnés y el cinturón de disipación de calor.
*Ya que la bombilla genera mucho calor, por favor asegúrese de que haya más de B+10mm de espacio para evitar el fallo del LED debido a la congestión de calor.
*El diámetro en la parte posterior de la válvula es de 22 mm en común.
*La dimensión vertical del controlador del LED no incluye el cableado, así que por favor asegúrese de que haya al menos 40mm más que el del controlador del LED para asegurar que haya suficiente espacio para el controlador y el cableado.
*Dado que el cinturón de disipación de calor de los LEDs genera mucho calor, por favor asegúrese de guardar el cinturón en el espacio con suficiente espacio para el equipo periférico para evitar el problema de calor. (La longitud del cinturón puede variar según el producto y el tamaño del lote).
Valve shape: HB3 (1 light)
Power consumption: 40W
[Size]
・LED driver main unit dimensions53.5mm (length), 28.5mm (width), 16mm (thickness)
・Approximate dimensions of LED heat dissipation beltLength (from root to tip): approx. 132mm, thickness (3 pcs. per side): approx. 5mm, width: 9mm
・A: 30mm, B: 51mm, C: 81mm
A: Dimensions from upper seat to valve end (valve body dimensions)
B: Dimensions from the upper seating surface to the top of the bulb (guide for interference of the bulb with headlight shades.)
[Set components]
・1 kit
・Instruction Manual
*For lens-cut headlights, it may not be possible to create optical axes due to the lack of reproducible focus and measurement.
*For projector type headlights, the use of the projector type headlights in the hi-beam area may not produce the maximum light intensity focus.
*We have confirmed that our products meet the bike inspection standards on many test bikes, but please understand that we cannot guarantee 100% compliance with the bike inspection standards for all bikes.
*Before ordering, please make sure to check whether or not the rear of the valve interferes with the surrounding parts of the bike and confirm that the valve type is compatible with the bike.
*Please make sure that there is at least A+15mm of space for storage, taking into consideration the routing of heat dissipation belts and harnesses.
*The bulb emits high heat. To prevent LED failure due to heat buildup, please make sure that there is a margin of B+10mm or more.
*The diameter at the rear of the valve is the same as 22mm, but it generates high heat, so please consider leaving enough room around the valve when storing it.
*The vertical dimension of the LED driver does not include the wiring, so please allow at least +40mm of space for the wiring as well as for the storage space of the driver.
*Since the LED heat radiation belt generates high heat, please make sure that there is enough space in the peripheral equipment to avoid heat problems as much as possible.(The length may vary slightly depending on the product and lot conditions, so this is only a rough estimate.)