No es necesario hacer ningún trabajo de cableado en el lado del vehículo, sólo hay que cambiar la bombilla del faro y la cubierta de goma incluida para convertir el faro en LED..
El uso de LEDs reduce el consumo de energía y extiende la vida de las bombillas mucho más allá de la de las bombillas halógenas..
Además, hay una garantía de un año de no iluminación desde la fecha de compra..
[Características]
El chip LED de alto rendimiento PHILIPS
Emplea un pequeño chip de LED de alto rendimiento de PHILIPS, con alto brillo y bajo consumo de energía..
La temperatura de color está fijada en 6500K, asegurando una visibilidad práctica incluso con mal tiempo..
También emite una luz pálida y da un aspecto elegante al vehículo..
La nueva estructura de la parte emisora de luz
Adoptando una nueva estructura para la parte emisora de luz, se puede obtener un eje de luz cercano al de la bombilla halógena H4..
Función automática incorporada para ajustar el consumo de energía
Función automática incorporada para reducir el consumo de energía en caso de que el voltaje de la fuente de alimentación caiga significativamente..
Eliminando el ventilador de refrigeración y usando una unidad de control separada, se ha conseguido una válvula más compacta y versátil!
La compactación del cuerpo de la válvula se logra eliminando el ventilador de refrigeración y teniendo una unidad de control separada, lo que aumenta la versatilidad de la válvula..
Esto permite instalarlo en vehículos donde no hay mucho espacio alrededor de la unidad de faros..
La válvula es enfriada efectivamente por la aleta que tiene excelentes propiedades de disipación de calor..
Un recubrimiento especial en la superficie de la aleta disipadora de calor mejora la disipación del calor..
Accesorios opcionales
SP Takekawa recomienda utilizar las bombillas de posición LED junto con los faros LED..
T10 Wedge LED Bombilla 2.0(Blanco) 1pc ( 05-08-0409)
Sustituir las bombillas de posición de los faros por bombillas reduce el consumo de energía y reduce la carga del sistema eléctrico..
The headlight of the Address V125(DT11A) can be converted to LED by replacing the headlight bulb and the attached special rubber cover without any wiring modification on the vehicle side.
LEDs save power and have a much longer life than halogen bulbs.
The product also comes with a one-year no-light warranty from the date of purchase.
[Features]
Adoption of high-performance LED chips manufactured by PHILIPS
The LEDs are made with PHILIPS high performance miniature LED chips and boast high brightness and low power consumption.
The luminous color temperature is set at 6500K to ensure practical visibility even in bad weather conditions.
It also emits a blue-white light to give the vehicle a stylish appearance.
■New structure adopted for the light-emitting part
By adopting a new structure for the light-emitting part, a light axis close to that of H4 halogen bulbs can be obtained.
■Built-in automatic function to adjust power consumption
An automatic function is built in to reduce power consumption in the event of a large drop in power supply voltage.
The compactness and versatility of the valve are realized by the cooling fanless design and the separate controller unit.
The valve body has been made compact and versatile by eliminating the need for a cooling fan and by using a separate controller unit.
This makes it possible to install in vehicles that do not have much space near the headlight unit.
The valve is effectively cooled by heat dissipating fins with excellent heat dissipation.
The surface of the heat dissipating fins is coated with a special coating to enhance heat dissipation.
■Recommended parts sold separately
SP Takegawa recommends the use of LED position lamps in conjunction with the LED headlights.
T10 Wedge LED Bulb 2.0 (White) 1 pc ( 05-08-0409)
Replacing the position bulbs in the headlights with bulbs saves power and reduces the burden on the electrical system.