Número de pieza del fabricante : DY-1G
cuello : negro brillante
[Tamaño]
vertical : Aprox. 74 mm.
Lateral : Aprox. 225 mm
Altura : Aprox. 90 mm
(El tamaño anterior no incluye el soporte de montaje.. )
Diámetro del ventilador : Aproximadamente 70 mm.
*No se puede instalar cuando el protector del motor está instalado.
*Coche con doble refrigeración (refrigeración por agua), FLD (Switchback) no es compatible.
*Por favor, compruebe el contenido de la foto.
*El contenido puede variar ligeramente de un lote a otro. No hay ningún problema en usarla.
*Las luces LED informan al conductor cuando el ventilador está funcionando.
*Se espera que impida el sobrecalentamiento y frene el deterioro del rendimiento del petróleo.
*El filtro de aceite para el EVO no se puede utilizar debido a las interferencias.
*Asegúrate de usar el filtro de aceite para TC.
*Coloca la manguera de aceite de manera que no interfiera con el marco y el cableado.
*Asegúrate de que no hay fugas de aceite en la junta del adaptador.
*El diseño de la manguera de montaje es ajustado.
*El trabajo tiene que hacerse en el ascensor.
*Dependiendo del lote de producción, el contenido y el color de la manguera pueden diferir de la imagen.
*Por favor, tenga en cuenta que no aceptamos especificaciones de color.
Manufacturer's Part Number: DY-1G
Color: gloss black
[Size]
●Height: Approx. 74mm
●Width: Approx. 225mm
●Height: Approx. 90mm
(The above sizes do not include the mounting bracket.)
●Fan diameter: Approx. 70mm
*This product cannot be installed if the engine guard is installed.
*Not compatible with twin cooled vehicles (water-cooled) and FLD (switch-back).
*Please check the contents in the image.
*There is a slight difference in the contents depending on the lot.There is no problem in using it.
*LED light informs the rider when the fan is running.
*It is expected to delay the deterioration of oil performance as well as to prevent overheating.
*Oil filters for EVO cannot be used due to the interference.
*Make sure to use the oil filter for TC.
*Set the oil hose in a way that it does not interfere with the frame or wiring.
*After installation, be sure to perform a test run and confirm that there are no oil leaks from the adapter gasket or other parts.
*The design of the mounting hose is tight.
*Therefore, the work must be carried out on a lift.
*Depending on the production lot, the contents and the color of the hose may differ from the images.
*Neofactory cannot accept color specifications.