Tipo de filtración del papel
El tamaño. : Se utiliza comúnmente para 6 y 8 mm de diámetro (tipo pequeño)
[Dimensiones.]
El diámetro interno de la parte de inserción : φ4.0/φ6.0
El diámetro exterior de la parte de inserción : φ6.0/φ8.0
Diámetro exterior máximo : φ32.0
longitud total... : 74.0mm
Diámetro de la manguera aplicable : 5,5 a 8,0 mm de diámetro
*Cuando use el enchufe común φ6 y φ8 (14485/40863), asegúrese de cortar la parte φ6 del enchufe con un cortador o algo así.
*El diámetro exterior máximo es el diámetro exterior de la parte de la articulación del cuerpo.
*La longitud total incluye la parte de inserción.
*El diámetro de la manguera es sólo para referencia.
[Nota]
* Cuando el filtro no desmontado se obstruye con suciedad, es hora de cambiarlo. Si no se cambia el filtro, el camino del flujo se bloqueará por el polvo y la gasolina no será suficiente. Para evitar tal situación, debe considerar la dirección de la instalación.
* No se puede usar para carburadores de gran diámetro como el FCR. Si lo usas, no podrás suministrar suficiente cantidad de gasolina al carburador.
* Debido a que está hecho de resina, no es resistente al calor. Por favor, instálelo en un lugar donde no le afecte el calor, como un motor. Puede ser deformado por el calor.
* La ruta de flujo de la gasolina es específica para cada producto. Por favor, compruébelo antes de la instalación.
* Inserte la manguera y asegúrela con la banda. Si no se hace así, puede producirse una fuga de gasolina, lo que puede dar lugar a graves accidentes, como un incendio.
Paper Filtration Type
Size: For both Φ6 and Φ8 (Small type)
[Specification]
Inner diameter of insertion part: Φ4.0 / Φ6.0
Outer diameter of insertion part: Φ6.0 / Φ8.0
Maximum outer diameter: Φ32.0
Full Length: 74.0mm
Applicable hose inner diameter: Φ5.5 to 8.0
*When using the Φ8 insertion port of the Φ6/Φ8 common (14485/40863), be sure to cut off the Φ6 part with a cutter.
*The maximum outer diameter is the outer diameter of the mating part of the body.
*Overall length is the total length including the insertion part.
*Compatible hose diameters are for reference only.
[Caution.]
*It is time to replace the non-dissolving filter when it is clogged with dirt.If left unchanged, the flow path will be blocked by debris and the gasoline flow will be insufficient, so it is necessary to check it frequently.In addition, please consider the direction of installation to avoid such a situation.
*Cannot be used with large diameter carburetors such as FCR.If used, a satisfactory amount of gasoline will not be supplied to the carburetor.
*Resin products are not resistant to heat.Install the unit in a location where it will not be affected by heat from the engine.It may be deformed by heat.
*The gasoline flow path is fixed for each product.Please check before installation.
*Insert the hose and secure it with the band.If it is not secure, gasoline may leak and cause a fire or other serious accident.