El tipo H4 con conmutación alta/baja para grandes desplazamientos, el tipo HS1 con conmutación alta/baja para pequeños desplazamientos, y el tipo HS2 con conmutación alta/baja para pequeños desplazamientos.
En primer lugar, tenemos una línea de tipo H7 que se utiliza a menudo en el tipo independiente alto y bajo..
En comparación con la válvula estándar, la longitud total de la válvula es más corta y no se requiere ninguna modificación del caso..
Bombillas H7 para faros independientes altos/bajos.
Bombilla LED de 55W.
El ventilador se usa para enfriar.
Kit de conversión de bombillas LED desarrollado bajo la premisa de que puedes usar las bombillas LED que simbolizan la próxima generación de luz con sólo reemplazar las paletas normales..
El brillo de última generación y la reducción del estrés en el cuerpo traen paz mental y diversión a tu vida..
¡Un estilo único de resolver los problemas de calor y espacio de los LEDs!
El estilo único de "borde", que emite luz y disipa calor, resuelve el problema de asegurar el espacio y la influencia de las condiciones ambientales externas, que ha sido un problema con los grandes disipadores de calor..
No hay suciedad en el disipador de calor, así que no hay pérdida de rendimiento..
(*No se requiere un disipador de calor para este producto, por lo que no habrá degradación funcional debido a la contaminación.. Como no hay absorción de calor del disipador de calor, no hay degradación de la función debido al calor del ambiente externo.. )
¡Consolidar la luz LED polarizada! ¡Utiliza un chip LED de alto rendimiento para conseguir suficiente intensidad y distribución de la luz!
Empleó con éxito el CREE[XP-L] con alta eficiencia luminosa en un diseño aerodinámico, y logró que la cantidad de luz emitida y su concentración cumplieran las normas de seguridad.
El cambio de Hi/Lo también elimina las normas de inspección para los vehículos de cuatro ruedas en la viga Lo..
(*Estamos probando la intensidad de la luz y la condensación, pero puede que no sea posible borrar la prueba dependiendo de las condiciones de la lente.. )
El estilo y la construcción únicos del sistema permiten la instalación en el espacio normal de la pulpa!
No hay necesidad de modificar la caja de luz y la cubierta ya que está construida con todos los componentes necesarios en el mismo tamaño que un foco normal..
El controlador ha sido diseñado deliberadamente para ser alojado en el estuche de la luz para que pueda ser fácilmente reemplazado con los parbs normales..
La construcción simple es resistente a la vibración y a los problemas!
El uso del cobre como material básico lo hace flexible a las vibraciones y su simple construcción contribuye a su ligereza..
Como resultado, la estructura es resistente a la vibración..
(*Ajustes para la unidad y el controlador solamente. (El H7 viene con un adaptador.)
Distribución de la luz
Los LEDs se usan como bombillas de faros, que tienen polaridad y son difíciles de concentrar la luz..
Larga vida
Mayor vida útil sin influencia del ambiente externo porque el calor se disipa en el cuerpo.
Ahorro de energía
Máxima emisión de luz con un mínimo de chip LED. Por lo tanto, el consumo de energía es bajo..
H4 type for large displacement with high / low switching, HS1 type for small displacement with switching, and HS2 type for small displacement with high / low switching
The lineup begins with the H7 type, which is often used for high and low independent types.
The overall length of the mounting section is shorter than that of the stock valve, and no modification of the case is required.
H7 bulbs are used for high / low independent headlights, etc.
A type of LED bulb that is compatible with 55W.
A fan is used for cooling.
The LED Bulb Conversion Kit was developed based on the premise that LED bulbs, which emit light symbolizing the next generation, can be used simply by replacing the stock pulb.
State-of-the-art brightness and reduced burden on the bike body bring peace of mind and enjoyment to motorcycle life.
■Solve LED heat and space problems in a unique style!
The unique "edge" style, which works to emit light and dissipate heat, clears the problem of securing space and the influence of ripening from the external environment, which was a problem with the type employing large heat sinks.
There is no contamination of the heat sinks, so there is no loss of performance.
(*The structure does not require a heat sink, which is a heat-dissipating component, so there is no functional degradation due to dirt.In addition, since there is no absorption of ripeness from the heat sink, there is no loss of function due to heat from the external environment.)
■Concentrate LED light with polarity!High-performance LED chips are used to achieve sufficient light intensity and light distribution!
The design with minimal waste uses CREE [XP-L] with high luminous efficiency to achieve a luminous flux that meets integration.
The Hi / Lo switching also meets the Lo beam standard, which is an inspection standard for 4-wheeled bikes.
(*Although we have tested the light intensity and light collection, there are cases where it may not be possible to clear the conditions of the lens).)
■Unique style and its construction allows installation in the stock pulp space!
The structure does not require modification of the light case or cover because it is built with the necessary items in the same size as the stock bulp.
The controller is also purposely set to fit in the light case so that it can be smoothly exchanged with the stock pulve.
■Simple construction resists vibration and trouble!
The use of copper as the basic material makes it flexible to vibration, and its simple construction contributes to its lightness.
The result is a structure that is highly resistant to vibration.
(*Setup for main unit and controller only.H7 comes with adaptor)
・Light distribution
LEDs as headlight bulbs have polarity, making it difficult to concentrate light, but we have achieved light concentration and sufficient light intensity without unnecessarily increasing the number of chips.
・Long life
Long life without being affected by the external environment because heat dissipation is performed in the main unit.
・Power Saving
Maximum luminescence with minimum LED chips.Therefore, power consumption is low.