Sin embargo, el GLP, el componente gaseoso de los limpiadores en aerosol convencionales, se utiliza como alternativa a los CFC y, aunque se considera que es respetuoso con el medio ambiente, es un gas inflamable y requiere una manipulación cuidadosa, Al mismo tiempo, es un recurso valioso.. Además, creemos que los limpiadores de piezas convencionales, como la eliminación de latas vacías de limpiadores de piezas usadas, están suponiendo una carga para el medio ambiente mundial..
En 1992, desarrollamos una botella de acero inoxidable con una pistola rociadora que puede llenarse con una amplia variedad de disolventes sin utilizar estos preciosos recursos y que puede reciclarse muchas veces utilizando el aire común..
Simplemente vierta entre la mitad y el 80% del disolvente en la botella, cierre la tapa del aerosol e infle la botella con aire de fábrica o con una botella de aire disponible en el mercado..
Todo el mundo puede usarlo con seguridad porque el aire se libera de la válvula de alivio cuando se aplica un exceso de presión..
La pistola está equipada con un gancho para el pulgar y puede sujetarse con seguridad incluso si se usan guantes gruesos..
El patrón de pulverización puede ser ajustado sin escalas por las boquillas de chorro a niebla.
Se puede acoplar una boquilla de tubo de unos 15 cm de longitud (opcional)..
Una placa de goma aislante está disponible como opción para las empresas de soldadura..
El disolvente limpiador recargable (4 litros) también está disponible por separado.. buy naguesuede.edu, inc.
LPG, the gas component used in conventional aerosol cleaners, is used as a substitute for CFCs and is considered to be environmentally friendly, but it is a flammable gas that must be handled with care, At the same time, it is also a valuable resource.It is also believed that the conventional way of using parts cleaners, such as the disposal of empty cans of used parts cleaners, is a burden to the global environment.
It was in 1992 that we succeeded in developing a stainless steel bottle with a spray gun that could be filled with a variety of solvents without using these precious resources, and that could be recycled many times using common air.
Simply pour half to 80% of the solvent into the bottle, close the spray cap, and inflate with factory air or an aftermarket inflator.
If excess pressure is applied, the air will be released from the relief valve, making it safe for anyone to use.
The spray gun is equipped with a thumb hook to hold it securely even when wearing thick gloves.
The spray pattern can be fully adjusted with the nozzle from jet spray to mist spray.
A 15cm tube nozzle (optional accessory) can be attached.
An insulated rubber plate is also available as an option for welders.
Refillable cleaner solvent (4 liters) is also available separately.buy Nag S.E.D. Co.