Hicimos el genuino tornillo de resina con palanquillas de aluminio..
Mecanizado CNC controlado por ordenador para productos de alta precisión.
El borde del casco no es pegajoso debido a la profundidad y precisión de la ranura, incluso cuando se instala con una moneda, y es posible diferenciar la apariencia sin perder la textura del casco Simpson..
También hemos hecho que la rendija sea un más, no un menos, así que es fácil trabajar con ella..
Hay seis tipos de productos, incluyendo el aluminio simple y el aluminio anodizado..
El proceso de anodizado es de alumita roja, clara, negra, dorada, naranja y azul..
[Instrucciones de instalación]
En el caso de un tornillo de resina genuino, la rosca del tornillo de resina está ligeramente deformada debido a la combinación de la precisión y el mecanismo de parada libre, pero en el caso de este tornillo, la sensación es ligeramente diferente porque está hecho de metal..
Como se mencionó anteriormente, los hilos no deformados hacen que la mordida sea un poco más débil y que haya un ligero movimiento después de la instalación, pero no hay ningún problema como está..
Si te preocupa esto, por favor usa un adhesivo de baja resistencia para tornillos como el Loctite..
*Cuando instale el producto, por favor, aplíquelo al hilo de 5-8mm y apriételo.. No abra o cierre el escudo por un tiempo después de apretarlo..
*El servicio de adscripción de Loctite está actualmente cerrado.
*Básicamente, recomendamos que uses una moneda de un centavo.. Esto se debe a que son compatibles con el mismo aluminio, pero si no los tienes, puedes usar monedas de 10 o 5 yenes.. Sin embargo, tenga en cuenta que no puede usar monedas con bordes dentados..
I made this screw from billet aluminum instead of the stock plastic screw.
Computer-controlled CNC machining is used for high-precision products.
Even if you install and remove a helmet by coin, it is hard to damage the edge because of depth and accuracy of slit.
The slit is not minus, but plus, so it is easy to work.
There are 6 types of products, including plain aluminum and anodized aluminum.
Anodizing is available in red anodized / clear / black anodized / gold anodized / orange anodized / blue anodized.
[Installation instructions]
In the case of the stock plastic screw, the thread of the plastic screw is slightly deformed due to the combination of the accuracy and the free stop mechanism, but in the case of this screw, the feeling is a little different because it is metal to metal, but please use it in the same way.
As mentioned earlier, the bite is slightly weakened because the screw thread is not deformed, and it moves a little after installation, but there is no problem even if it remains as it is.
If you are concerned about this, please use a low-strength screw adhesive such as Loctite.
*Apply to the thread 5.8 mm when installing and tighten.Do not open or close the shield for a while after tightening.
*The LockTight attachment service is currently discontinued.
*We recommend using a 1-yen coin as the primary choice.This is because aluminum coins work well together. If you don't have a 1-yen coin, you can also use a 10-yen or 5-yen coin.However, please be aware that coins with ridges cannot be used.