This front fork kit absorbs the shock from the road surface and improves the tracking of the road surface, so that you can enjoy stable driving.
Reinforced upright front forks suitable for high power engine parts.The Type 1 front fork uses the same free valve type damping force generation mechanism as the larger models to improve stability and reduce shock on rebound.
The use of DU metal greatly improves the operability, and the structure has high potential for racing use as well.
In case of Monkey, you need to remove the normal folding handle and purchase the handle pipe separately.Gorilla can be installed with stock handlebars.The stock front fender can be installed.
■Top bridge/steering stem
Duralumin machined and anodized.The back side is lightly punched.With steering lock bracket.
Offset length: 40mm offset from stem center
Color anodized aluminumSilver
・Fork pitch: 174mm
Wheel mounting width: 1.5 mm149mm
■Drum brake specification
Original parts are used for the brake panel and brake arm for drum brake specification.
For the drum brake specification, the normal drum brake hub and brake shoe are used as they are, and the brake panel and brake arm are made of original parts.
The brake panel is made of cast aluminum barrel finish and the brake arm is made of buffed aluminum.
■About the installation of SP Takegawa's 12-inch wheels
The following Φ27 upright front fork kit for 10" wheels is also compatible with SP Takegawa's 12" wheels.However, the tires to be used are limited to the MAXXIS 12-inch flat tires sold at SP Takegawa.When other tire sizes are installed, they may interfere with the outer tube of the front fork.Also, SP Takegawa front fender may interfere with the tire and may not be able to be installed.
How to get the wheel center (12 inch wheel use condition) ■Parts purchased separately
Headlight stay for Φ27 upright fork
09-03-007blinker stay for Φ27 upright fork
05-08-0002*This blinker bracket can be attached to both the standard blinker and SP Takegawa's custom blinker.
*SP Takegawa 10-inch wheels or SP Takegawa 12-inch wheels are required.
*SP Takegawa front fenders must be purchased separately.
*In case of drum brakes, use 6mm spacer (sold separately) to center the front wheel.
06-09-1302) is required.