Peso del brazo oscilante: Normal 3,5 kg a 1,8 kg (para GROM, Triple cuadrado, sin estabilizador, +0cm)
El brazo oscilante está hecho de aluminio 7N01, que pesa 1,8 kg en comparación con el brazo oscilante de la acción que pesa 3,5 kg, para una alta rigidez y ligereza..
Explicación de las opciones
[Terminación del brazo oscilante]
Acabado anodizado negro (G-Craft #60198) +25,000 yenes
Acabado de Cerakote (G-Craft #60807) +30000yen
[¿Qué es Cerakote?]
Cerakote es una pintura especial para hornear y para temperatura ambiente hecha por NIC, que actualmente es usada por las fuerzas militares de los Estados Unidos..
Ha sido probado para condiciones duras, y es superior en resistencia al calor, resistencia al desgaste, durabilidad, resistencia a los disolventes, disipación de calor y aislamiento térmico..
La cerámica es triturada por una máquina especial y mezclada en la pintura para mejorar la fuerza de la película de pintura.. Esto da como resultado una superficie nacarada, pero la capa puede ser muy delgada (25 micrones).
Incluso el cordón de soldadura puede dejarse atrás sin esconderse.
Tiene la mayor adhesión entre todos los materiales de revestimiento, y no se arruga incluso si se dobla, y la pintura no se desprende fácilmente ni siquiera cuando se aplican los escalones..
*Por favor, permita de 3 a 5 semanas para un parto normal.
Opción 1] Deslizador de cadena atornillado (G Craft Part No.: 60228) +1000yen
Cambie el deslizador de la cadena de remachado a atornillado.. Es fácil de reemplazar cuando está desgastado.
Opción 2] Tipo de cojinete de la parte del pivote (G Craft Part No. 60006) +3000yen
La norma cambia la parte del pivote del casquillo a un cojinete.
Mejora de la durabilidad y de las características de funcionamiento suave.
Opción 3] Procesamiento adicional de la base del gancho de soporte (M6) (G Craft Part No. 60903) +3000yen
Puedes instalar ganchos de soporte G-Craft o M6..
Opción 4] Opción de tirar de la cadena
Gancho de soporte de carreras (G Craft Part No. 60186) +3000 yenes
La parte trasera de la cadena de tracción convencional se cambia a una especificación de gancho de soporte.. Se pueden instalar los ganchos de soporte de carreras G-Craft Nº 32071, 32072 y 32073..
*G-Craft Parte No.: 33170AP Soporte de Calibre Lockheed No Compatible (Interferencia)
Tipo de retroceso (G-Craft #60221) +3000 yenes
Este es un ajustador de tracción trasera diseñado para eliminar la molestia de ajustar la cadena..
Dado que la tuerca de ajuste está situada en el extremo del brazo oscilante, es fácil ajustar la pieza de ajuste, que antes era difícil de girar debido a la interferencia de la herramienta.
*No se puede usar con el tipo de gancho de soporte de carreras y el tipo OW.
Tipo OW (G-Craft #60014) +3000yen
Tirador de cadena cónica para eliminar la desalineación vertical del eje..
El panel superior cónico se mueve para que no haya movimiento vertical.. Este mecanismo también se utiliza en los brazos oscilantes de las grandes bicicletas..
OW Type Racing Stand Hook (G Craft Part #60188) +5000yen
La parte trasera de la cadena de tracción tipo OW se cambia a una especificación de gancho de soporte..
Se pueden instalar los ganchos de soporte de carreras G-Craft Nº 32071, 32072 y 32073..
*G-Craft Parte No.: 33170AP Soporte de Calibre Lockheed No Compatible (Interferencia)
Tipo excéntrico (G-Craft #60199) +6000yen
Este es un tirón de cadena excéntrico que es común en las motocicletas Kawasaki..
*Con el tipo de disco sólo se puede utilizar el tipo de soporte de pinza que está fijado en la parte inferior del basculante..
Swingarm Weight: Stock 3.5kg→1.8kg (for GROM, triple square, no sway bar, +0cm)
The swingarm is made of aluminum 7N01 material and it is 1.8kg lighter than stock swingarm 3.5kg.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Chain adjuster option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.