- It looks a little cheap, but the Fixed Type is easy to use.I have a Free one, but it comes off during use, so I will use this one.Lee mas
- Vino (5AU SA10J) Maintenance was used for maintenance of theRear suspension of Other Brand Products (5-step adjustment) is installed.The accompanying Pin spanner system is poorly initialized.I bought ...Lee mas
- I bought it to adjust Minimoto's rear shock.When I tried to use it, the position of the bottom prop was not suitable for Minimoto's Shock.I sanded off the bottom edge and it became easier to use.It's ...Lee mas
- I bought it because I'm going to install an external suspension for NMAX soonI've had many opportunities to do Tandem touring and frequent CB400SF pre-road I'm going to adjust it, but it's a bit of a ...Lee mas
- I got used KITACO suspension, but I adjust Pre-road Ring to adjust hardness Spec. It was supposed to be.Adjustment Ring has a dent and I bought it this time because I needed a dedicated Pin spanner, b...Lee mas
- For adjustment of Rear suspension.The same thing is included in the on-board tool, but it is troublesome to remove Seat and remove it one by one, so I thought it might be about 1 pc and purchased it.H...Lee mas
- This product is not necessarily bad.He thinks that it can use for Chain adjustment of DUCATI, and it purchases.However, business was not made.It gets injured in a hand moreover.It is its selection mis...Lee mas
- [Webike Monitor] It purchased to adjustment of pure Rear suspension.Although the end part must have somewhat sweet connection and must press down thoroughly, I think that one is a tool in which it is ...Lee mas
- Since a Shock was changed into the KITACO, it purchased.
I think in fact that what is necessary is to just be attached to a Shock by attachment.
Lee mas - The pin spanner possessed from the first was lost, and since it was required to carry out initial adjustment simultaneously with a tire change, it purchased newly. Since a price is also cheap, without...Lee mas
- Although two are located in a line and it is on the screen of Webike, it is the left-hand side shorter one. NS50F: It purchased to adjustment of the stainless screw. Although it is a usage feeling, a ...Lee mas
- In order to adjust the initial of rear suspension, and vehicle Takanaga, necessity was thought and it purchased. Since it goes also into the in-vehicle tool bag of KSR if it is this size, it is adjust...Lee mas
- It purchased as adjustment of the suspension of DUCATI1098, and a chain adjustable tool for cantilever swing arm vehicles. Although the pure tool of no less than 5000 yen is carried out, what has here...Lee mas
- It purchased for rear suspension adjustment of CB1300SB. It is the touch which it is strong compared with an in-vehicle tool, is easy-to-use, and may be easy to put in power.Lee mas
- It purchased in order to carry out chain adjustment of DUCATI1098. Although the pure tool of no less than 5000 yen is carried out, what has here [ almost the same at 1/5 ] is obtained. Although the gr...Lee mas
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING